污泥低温余热干化的模拟研究及参数优化

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (524 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract Aspen Plus process simulation software was used to model low-temperature waste heat drying process, focusing on the effects of drying parameters, i.e., sludge moisture content, recycling air flow rate and bypass ratio. Besides, energy consumption for the dying process was analyzed. The results indicated that the low-temperature drying of sludge was significantly influenced by the outlet temperatures of the heater and condenser. The optimal outlet temperature for the heater was 80℃, while the optimal outlet temperature for the condenser was 40℃. When the target moisture content was 30%, the minimum recycling air flow rate was 97598Nm³/h, and the maximum bypass ratio was 0.70. Increasing the recycling air flow rate and reducing the bypass ratio were beneficial for low-temperature sludge drying. The specific moisture extraction rate (SMER) exhibited an increasing-then-decreasing trend with the increase of recycling air flow rate and bypass ratio. When the target moisture content was 30%, the maximum SMER2 could reach to 24.7kg/kWh. Aspen Plus Simulation can be applied to guide the design of low-temperature sludge drying device and the optimization of corresponding parameters, and further provide theoretical supports for promoting large-scale application of low-temperature waste heat drying.

Key words： sludge low temperature drying waste heat Aspen Plus process simulation

Received: 09 January 2023

PACS:

X705

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHOU Yin-xi
	SHI Wan
	LI Xiao-jiao
	YUAN Jin
	YU Li
	JI Wei
	PENG Ya

Cite this article:

ZHOU Yin-xi,SHI Wan,LI Xiao-jiao等. Simulation study and optimization of parameters for low temperature drying of sludge using waste heat[J]. CHINA ENVIRONMENTAL SCIENCECE, 2023, 43(8): 4099-4105.

URL:

http://www.zghjkx.com.cn/EN/ OR http://www.zghjkx.com.cn/EN/Y2023/V43/I8/4099

[1]	谢昆,尹静,陈星.中国城市污水处理工程污泥处置技术研究进展[J].工业水处理, 2020,40(7):18-23. Xie K, Yin J, Chen X. Research progress on sludge treatment technology of urban sewage treatment project in China[J]. Industrial Water Treatment, 2020,40(7):18-23.
[2]	翁焕新.污泥无害化、减量化、资源化处理新技术[M].北京:科学出版社, 2009:15-20. Weng H X. New technology of sludge harmless, reduction and recycling treatment[M]. Beijing:Science Press, 2009:15-20.
[3]	Goh L J, Othman M Y, Mat S, et al. Review of heat pump systems for drying application[J]. Renewable and Sustainable Energy Reviews, 2011,15:4788-4796.
[4]	方兴,李志华,杨成建.冷热联用对市政脱水污泥低温干燥的影响[J].中国环境科学, 2020,40(6):2546-2553. Fang X, Li Z H, Yang C J. Discussion on the existing problems and advantages of heat pump low temperature drying of sludge[J]. China Environmental Science, 2020,40(6):2546-2553.
[5]	吴青荣,张绪坤,王高敏.城市污泥低温干化技术研究进展[J].环境工程, 2017,35(3):127-131. Wu Q R, Zhang X K, Wang G M. Advances on low temperature drying technology of municipal sewage sludge[J]. Environmental Engineering, 2017,35(3):127-131.
[6]	Zheng Q S, Cao L, Ni L, et al. Operating characteristics of sludge heat pump dryer and influencing factors of performance:A field experiment in an electroplating factory[J]. Applied Thermal Engineering, 2022, 212,118602.
[7]	Zhang T, Yan Z W, Wang L Y, et al. Theoretical analysis and experimental study on a low-temperature heat pump sludge drying system[J]. Energy, 2021,214:118985.
[8]	柳兆忠.污泥低温干化技术在煤化工装置的应用及优化[J].大氮肥, 2021,44(5):358-360. Liu Z Z. Low temperature sludge drying technology applied in coal chemical plant and its optimization[J]. Large Scale Nitrogenous Fertilizer Industry, 2021,44(5):358-360.
[9]	梁静,薛会鸽,袁钢.污泥低温冷凝干化机运行效果影响因素和蒸发除湿控制参数[J].节能与环保, 2021,(6):94-96. Liang J, Xue H G, Yuan G. Influencing factors of operation effect of sludge low temperature condensation dryer and control parameters of evaporation dehumidification[J]. Energy Conservation and Environmental Protection, 2021,(6):94-96.
[10]	吕开雷,杨淘,陈紫君,等.电解铝烟气余热低温干化处理市政污泥工程应用[J].中国给水排水, 2021,37(12):120-123. Lu K L, Yang T, Chen Z J, et al. Application of low temperature drying in municipal sludge treatment with waste heat of electrolytic aluminum flue gas[J]. China Water & Wastewater, 2021,37(12):120-123.
[11]	许太明,孙洪娟,曲献伟,等.污泥低温真空脱水干化成套技术[J].中国给水排水, 2013,29(2):106-108. Xu T M, Sun H J, Qu X W, et al. Sludge low-temperature vacuum drying system[J]. China Water & Wastewater, 2013,29(2):106-108.
[12]	李拓,陈贻龙.广州鳌头污水处理厂污泥干化工艺设计[J].净水技术, 2019,38(7):42-46. Li T, Chen Y L. Technological process design of sludge drying project of Aotou wastewater treatment plant in Guangzhou[J]. Water Purification Technology, 2019,38(7):42-46.
[13]	王国栋,戴之希,刘嘉伟,等.烟气干化污泥对颗粒物的去除作用及其影响因素[J].中国环境科学, 2016,36(1):42-49. Wang G D, Dai Z X, Liu J W, et al. The effects of sludge drying on removal of particulate matters from flue-gas[J]. China Environmental Science, 2016,36(1):42-49.
[14]	王一坤,柳宏刚,周凌宇,等.烟气抽取位置对抽烟气干化污泥耦合发电机组的影响[J].热力发电, 2021,50(2):43-48. Wang Y K, Liu H G, Zhou L Y, et al. Effects of flue gas extraction position on sludge-coal blending combustion generation units[J]. Thermal power generation, 2021,50(2):43-48.
[15]	Wang Z Y, Xu L, Liu D, et al. Effects of air temperature and humidity on the kinetics of sludge drying at low temperatures[J]. Energies, 2021,14(22):7722.
[16]	李荣康,曹琳,黄冠英.闭式热泵污泥低温干化系统的设计与分析[J].低温建筑技术, 2020,42(10):142-149. Li R K, Cao L, Huang G Y. Design and analysis of a closed heat pump sludge low-temperature drying system[J]. Low Temperature Architecture Technology, 2020,42(10):142-149.
[17]	朱有法.闭式低温污泥干化系统设计[A]//黄森军.《环境工程》2019年全国学术年会论文集[C].北京:工业建筑出版社, 2019:757-765. Zhu Y F. Design of closed low temperature sludge drying system[A].//Huang S J.《Environmental Engineering》Proceedings of 2019National Academic Annual Conference[C]. Beijing:Industrial Construction Press, 2019:757-765.
[18]	杨儒浦,胡松,池寰瀛.基于Aspen Plus的污泥热解与混烧技术经济特性对比分析[J].可再生能源, 2017,35(6):798-804.
[19]	袁言言,黄瑛,张冬.污泥焚烧能量利用与污染物排放特性研究[J].动力工程学报, 2016,36(11):934-940. Yuan Y Y, Huang Y, Zhang D. Energy utilization and pollutants emission in sewage sludge incineration[J]. Journal of Chinese Society of Power Engineering, 2016,36(11):934-940.
[20]	吴少基.污泥干化-热解耦合工艺的研究[D].厦门:厦门大学, 2019. Wu S J. Study on sludge drying-pyrolysis coupling process[D]. Xiamen:Xiamen University, 2019.
[21]	王天皓,张振涛,杨俊玲,等.多级热泵串联干燥系统性能模拟[J].制冷技术, 2020,40(4):15-21. Wang T H, Zhang Z T, Yang J L, et al. Performance simulation on multi-stage series heat pump drying system[J]. Chinese Journal of Refrigeration Technology, 2020,40(4):15-21.
[22]	胡传坤,高建民,付翔,等.热泵除湿干燥系统循环风旁通率的试验[J].木材工业, 2008,22(5):8-10. Hu C K, Gao J M, Fu X, et al. An experimental study of wind circulation bypass-rate in a heat-pump drying system[J]. China Wood Industry, 2008,22(5):8-10.
[23]	Minea V. Drying heat pumps-Part II:Agro-food, biological and wood products[J]. International Journal of Refrigeration, 2013,36(3):659-673.