医疗废物热解技术综述

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (751 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The basic characteristics and treatment status of medical waste in China were reviewed in this work, and a comparative analysis among different disposal technologies has been performed. Pyrolysis was proposed for medical waste treatment, and the pollution emission as well as the control strategy were investigated. The emerging pyrolysis technologies integrated with medical waste treatment were introduced, and the design of pyrolysis facility was discussed. Furthermore, the future direction of medical waste pyrolysis was analyzed based on the technology development, policies and regulations.

Key words： medical waste pyrolysis technological development equipment processes

Received: 23 January 2024

PACS:

X705

Corresponding Authors: 李健,助理研究员,lijian_2014@tju.edu.cn E-mail: lijian_2014@tju.edu.cn

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Tang-wei
	LI Jian
	YAN Bei-bei
	CHEN Guan-yi

Cite this article:

LI Tang-wei,LI Jian,YAN Bei-bei等. Pyrolysis of medical waste: A review[J]. CHINA ENVIRONMENTAL SCIENCECE, 2024, 44(8): 4432-4445.

URL:

http://www.zghjkx.com.cn/EN/ OR http://www.zghjkx.com.cn/EN/Y2024/V44/I8/4432

[1] 生态环境部.生态环境部固体废物与化学品司有关负责人就全国医疗废物产生与处置有关情况答记者问[EB/OL]. https://www.mee.gov.cn/ywdt/zbft/202206/t20220629_987078.shtml#. Ministry of Ecology and Environment. An official from the solid waste and chemicals management department of the ministry of ecology and environment answers reporters' questions on national medical waste generation and disposal [EB/OL]. https://www.mee.gov.cn/ywdt/zbft/202206/t20220629_987078.shtml#.
[2] Singh R K, Ruj B. Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste [J]. Fuel, 2016, 174:164-171.
[3] 陈扬,王开宇,刘富强.医疗废物非焚烧处理技术应用及发展趋势探讨[J]. 环境保护, 2005,(7):57-58. Chen Y, WANG K Y, LIU F Q. Analysis on technological application and development trend of nonincineration technology for medical waste disposal [J]. Environmental Protection, 2005,(7):57-58.
[4] Zamri M F M A, Hasmady S, Akhiar A, et al. A comprehensive review on anaerobic digestion of organic fraction of municipal solid waste [J]. Renewable & Sustainable Energy Reviews, 2021,137:110637.
[5] Ilyas S, Srivastava R R, Kim H. Disinfection technology and strategies for COVID-19hospital and bio-medical waste management [J]. Science of the Total Environment, 2020,749:141652.
[6] Wang J, Shen J, Ye D, et al. Disinfection technology of hospital wastes and wastewater: Suggestions for disinfection strategy during coronavirus Disease 2019(COVID-19) pandemic in China [J]. Environmental Pollution, 2020,262:114665.
[7] Ma D, Feng Q, Chen B, et al. Insight into chlorine evolution during hydrothermal carbonization of medical waste model [J]. Journal of Hazardous Materials, 2019,380:120847.
[8] Hong J, Zhan S, Yu Z, et al. Life-cycle environmental and economic assessment of medical waste treatment [J]. Journal of Cleaner Production, 2018,174:65-73.
[9] 刁静严.医废处置与生活垃圾统筹建设或成发展趋势[EB/OL]. https://www.sohu.com/a/416203024_120298443. Diao J Y. The trend of integrating medical waste disposal and municipal solid waste disposal may emerge [EB/OL]. https://www.sohu.com/a/416203024_120298443.
[10] Makarichi L, Jutidamrongphan W, Techato K. The evolution of waste-to-energy incineration: A review [J]. Renewable & Sustainable Energy Reviews, 2018,91:812-821.
[11] 李悦,陈扬,吴安华,等.我国边远地区医疗废物处置技术和管理模式探讨[J]. 中国感染控制杂志, 2019,18(1):83-88. Li Y, Chen Y, Wu A H, et al. Exploring on technique and management mode of medical waste disposal in remote areas of China [J]. Chinese Journal of Infection Control, 2019,18(1):83-88.
[12] 周小莉,郭春霞,时翔明,等.重大疫情期间医疗废物应急处置中的问题及建议[J]. 环境工程学报, 2020,14(7):1705-1709. Zhou X L, Guo C X, Shi X M, et al. Problems and suggestions on emergency disposal of medical waste during major epidemic [J]. Chinese Journal of Environmental Engineering, 2020,14(7):1705-1709.
[13] 侯林桐,杨学忠,李健,等.基于质能流评估的餐厨垃圾热解自供能特性研究[J]. 环境工程, 2022,40(12):37-45. Hou L T, Yang X Z, Li J, et al. Self-power property of pyrolysis of kitchen waste: an investigation on the mass and energy flow [J]. Environmental Engineering, 2022,40(12):37-45.
[14] 肖信彤,唐剑云,邱泽东,等.新冠肺炎疫情期间武汉市医疗废物应急处置研究[J]. 环境工程, 2023,41(5):195-201. Xiao X T, Tang J Y, Qiu Z D, et al. Emergency disposal of medical waste in Wuhan during the COVID-19epidemic [J]. Environmental Engineering, 2023,41(5):195-201.
[15] 姚丽铭,王亚琢,范洪刚,等.餐厨垃圾处理现状及其热解技术研究进展[J]. 化工进展, 2023,42(7):3791-3801. Yao L M, Wang Y Z, Fan H G, et al. Treatment status of kitchen waste and its research progress of pyrolysis technology [J]. Chemical Industry and Engineering Progress, 2023,42(7):3791-3801.
[16] Su G, Ong H C, Ibrahim S, et al. Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges [J]. Environmental Pollution, 2021,279:116934.
[17] 朱琳玉,王林智.我国医疗废物监管中的问题及其对策——基于对2012~2022年全国96份行政判决书的分析[J]. 医学与法学, 2024,16(1):99-104. Zhu L Y, Wang L Z. Problems and countermeasures in the supervision of medical waste in China——based on the analysis of 96 judgments from 2012 to 2022 in China [J]. Medicine & Jurisprudence, 2024, 16(1):99-104.
[18] 谢荣.整体式医疗垃圾热解焚烧炉实验研究[D]. 武汉:华中科技大学, 2011. Xie R. The Experimental study of integral medical waste pyrolysis incinerator [D]. Wuhan: Huazhong University of Science and Technology, 2011.
[19] 陈静,张于峰,邓娜,等.医疗垃圾热解气化的原理[J]. 煤气与热力, 2005,(11):15-19. Chen J, Zhang Y F, Deng N, et al. Principle of pyrolysis and gasification of medical wastes [J]. Gas & Heat, 2005,(11):15-19.
[20] Xu W, Liu J, Ding Z, et al. Dynamic pyrolytic reaction mechanisms, pathways, and products of medical masks and infusion tubes [J]. Science of the Total Environment, 2022,842:156710.
[21] Ding Z, Chen H, Liu J, et al. Pyrolysis dynamics of two medical plastic wastes: Drivers, behaviors, evolved gases, reaction mechanisms, and pathways [J]. Journal of Hazardous Materials, 2021,402:123472.
[22] Qin L, Han J, Zhao B, et al. Thermal degradation of medical plastic waste by in-situ FTIR, TG-MS and TG-GC/MS coupled analyses [J]. Journal of Analytical and Applied Pyrolysis, 2018,136:132-145.
[23] Dash A, Kumar S, Singh R K. Thermolysis of Medical Waste (Waste Syringe) to Liquid Fuel Using Semi Batch Reactor [J]. Waste and Biomass Valorization, 2015,6(4):507-514.
[24] Kumar A, Pali H S, Kumar M. A comprehensive review on the production of alternative fuel through medical plastic waste [J]. Sustainable Energy Technologies and Assessments, 2023,55:102924.
[25] Ullah F, Zhang L, Ji G Z, et al. Experimental analysis on products distribution and characterization of medical waste pyrolysis with a focus on liquid yield quantity and quality [J]. The Science of the total environment, 2022,829:154692.
[26] Zhu H M, Yan J H, Jiang X G, et al. Study on pyrolysis of typical medical waste materials by using TG-FTIR analysis [J]. Journal of Hazardous Materials, 2008,153(1/2):670-676.
[27] 左禹,朱琳,吴占松.生活垃圾典型组分的热解特性研究[J]. 环境保护, 2004,10:34-38. Zuo Y, Zhu L, Wu Z S. Study on the pyrolysis characteristics of tipical composition of municipal solid waste [J]. Environmental Protection, 2004,10:34-38.
[28] Xiong Z, Li H, Zhao Z, et al. An experimental study on pyrolysis and incineration of medical wastes [J]. Techniques and Equipment for Environmental Pollution control, 2006,7(12):92-95.
[29] Zhu H M, Yan J H, Jiang X G, et al. Study on pyrolysis of typical medical waste materials by using TG-FTIR analysis [J]. Journal of Hazardous Materials, 2008,153(1/2):670-676.
[30] Quanwei L, Zhiyuan Z, Manjiang Y, et al. Thermal degradation of KN90 gauze mask rope waste: Thermogravimetric and thermodynamic analyses, kinetic modeling and volatile products [J]. Case Studies in Thermal Engineering, 2023,43:102816.
[31] 孙旭丽.一次性口罩的热裂解与挥发物的反应研究[D]. 北京:北京化工大学, 2022. Sun X L, Study on the pyrolysis of disposable masks and reaction of volatiles [D]. Beijing: Beijing University of Chemical Technology, 2022.
[32] 马洪亭,王芳超,杨国利,等.三种典型医疗废物热解过程的差热分析[J]. 化工进展, 2012,31(4):933-937. Ma H T, Wang F C, Yang G L, et al. Differential thermal analysis during the thermal decomposition of three typical medical wastes [J]. Chemical Industry and Engineering Progress, 2012,31(4):933-937.
[33] 陈潘虹.医疗垃圾组分的热解气化实验研究[D]. 武汉:华中科技大学, 2009. Chen P H. Experimental study of pyrolysis & gasification characteristics of hospital waste components [D]. Wuhan: Huazhong University of Science & Technology, 2009.
[34] 马洪亭,张于峰,邓娜,等.影响医疗垃圾热解特性的主要因素[J]. 化工进展, 2007,(12):1783-1789. Ma H T, Zhang Y F, Deng N, et al. Main factors influencing the thermal decomposition characteristics of medical waste [J]. Chemical Industry and Engineering Progress, 2007,(12):1783-1789.
[35] U. S, F. R, S. H. Recovery of pyrolytic oil from thermal pyrolysis of medical waste [J]. Журнал інженерних наук, 2018,5(2):H2.
[36] Qin L, Han J, Zhao B, et al. The kinetics of typical medical waste pyrolysis based on gaseous evolution behaviour in a micro-fluidised bed reactor [J]. Waste Management & Research, 2018,36(11):1073-1082.
[37] 程烨涛.医疗废弃物热解过程传热强化机制探究[D]. 武汉:华中科技大学, 2022. Cheng Y T. Exploration on the mechanism of heat transfer enhancement in the pyrolysis process of medical waste [D]. Wuhan: Huazhong University of Science and Technology, 2022.
[38] Yan J, Zhu H, Jiang X, et al. Pyrolysis and gasification characteristic of multi-component medical waste [J]. Journal of Zhejiang University. Engineering Science, 2008,42(5):885-889.
[39] 马洪亭,张于峰,邓娜,等.影响医疗垃圾热解特性的主要因素[J]. 化工进展, 2007,26(12):1783-1789. Ma H T, Zhang Y F, Deng N, et al. Main factors influencing the thermal decomposition characteristics of medical waste [J]. Chemical Industry and Engineering Progress, 2007,26(12):1783-1789.
[40] 严建华,祝红梅,蒋旭光,等.医疗垃圾多组分热解气化特性[J]. 浙江大学学报(工学版), 2008,42(5):885-889. Yan J H, Zhu H M, Jiang X G, et al. Pyrolysis and gasification characteristic of multi-component medical waste [J]. Journal of Zhejiang University (Engineering Science), 2008,42(5):885-889.
[41] Huang H, Tang L. Treatment of organic waste using thermal plasma pyrolysis technology [J]. Energy Conversion and Management, 2007, 48(4):1331-1337.
[42] Deng N, Wang W, Chen G, et al. Pyrolysis characteristics of rubber compositions in medical waste [J]. Journal of Central South University, 2013,20(9):2466-2471.
[43] Deng N, Cui W, Wang W, et al. Experimental study on co-pyrolysis characteristics of typical medical waste compositions [J]. Journal of Central South University, 2014,21(12):4613-4622.
[44] 王乔力,张于峰,马洪亭,等.医疗垃圾的热解特性[J]. 环境卫生工程, 2006,3:40-42. Wang Q L, Zhang Y F, Ma H T, et al. Pyrolysis characteristics of medical wastes [J]. Environmental Sanitation Engineering, 2006,3:40-42.
[45] 邓娜,于晓慧,张于峰,等.输液管与典型医疗废物组分的混合热解特性[J]. 华中科技大学学报(自然科学版), 2010,38(3):124-128. Deng N, Yu X H, Zhang Y F, et al. Co-pyrolysis characteristics of transfusion tubes and other typical medical waste compositions [J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2010,38(3):124-128.
[46] 方书起,崔俊乐,史兆臣,等.医疗固体废弃物热解及其产物特性分析[J]. 化工进展, 2019,38(12):5587-5593. Fang S Q, Cui J L, Shi Z C, et al. Medical solid waste pyrolysis and analysis of its product characteristics [J]. Chemical Industry and Engineering Progress, 2019,38(12):5587-5593.
[47] Wu Y W, Li A J, Lei S, et al. Prediction of pyrolysis product yield of medical waste based on BP neural network [J]. Process Safety and Environmental Protection, 2023,176:653-661.
[48] Deng N, Zhang Y, Wang Y. Thermogravimetric analysis and kinetic study on pyrolysis of representative medical waste composition [J]. Waste Management, 2008,28(9):1572-1580.
[49] Fang S, Jiang L Y, Li P, et al. Study on pyrolysis products characteristics of medical waste and fractional condensation of the pyrolysis oil [J]. Energy, 2020,195:116969.
[50] Som U, Rahman F, Hossain S. Recovery of pyrolytic oil from thermal pyrolysis of medical waste [J]. Журнал інженерних наук, 2018,5(2):H5-H8.
[51] Lin H, Huang M, Luo J, et al. Hydrocarbon fuels produced by catalytic pyrolysis of hospital plastic wastes in a fluidizing cracking process [J]. Fuel Processing Technology, 2010,91(11):1355-1363.
[52] Jung S, Lee S, Dou X, et al. Valorization of disposable COVID-19mask through the thermo-chemical process [J]. Chemical Engineering Journal, 2021,405:126658.
[53] Dash A, Kumar S, Singh R K. Thermolysis of medical waste (waste syringe) to liquid fuel using semi batch reactor [J]. Waste and Biomass Valorization, 2015,6(4):507-514.
[54] Paraschiv M, Kuncser R, Tazerout M, et al. New energy value chain through pyrolysis of hospital plastic waste [J]. Applied Thermal Engineering, 2015,87:424-433.
[55] Zhou H, Wu C, Onwudili J A, et al. Polycyclic aromatic hydrocarbons (PAH) formation from the pyrolysis of different municipal solid waste fractions [J]. Waste Management, 2015,36:136-146.
[56] 汪洪军,李新国,赵军.热解—焚烧处理医疗垃圾及二次污染物的防治[J]. 节能与环保, 2002,(8):24-26. Wang H J, Li X G, Zhao J. Pyrolysis - incineration treatment of medical waste and prevention of secondary pollutants [J]. Energy Conservation & Environmental Protection, 2002,(8):24-26.
[57] Hunsinger H, Jay K, Vehlow J. Formation and destruction of PCDD/F inside a grate furnace [J]. Chemosphere, 2002,46(9/10):1263-1272.
[58] Kaminsky W, Kim J S. Pyrolysis of mixed plastics into aromatics [J]. Journal of Analytical and Applied Pyrolysis, 1999,51(1/2):127-134.
[59] Dudkina L M, Gerasimov G Y, Khaskhachikh V V. Thermogravimetric and kinetic study of pyrolysis of chlorine- containing medical waste [J]. IOP Conference Series: Earth and Environmental Science, 2019,272(2):22116-22117.
[60] Lin H, Huang M, Luo J, et al. Hydrocarbon fuels produced by catalytic pyrolysis of hospital plastic wastes in a fluidizing cracking process [J]. Fuel Processing Technology, 2010,91(11):1355-1363.
[61] 何丽娟,袁致林,朱超群,等.高温热解医疗垃圾酸性气化气吸收实验研究[J]. 科学技术与工程, 2016,16(7):100-102. He L J, Yuan Z L, Zhu C Q, et al. Experimental study of absorption acid gasified gas in pyrolysis medical waste [J]. Science Technology and Engineering, 2016,16(7):100-102.
[62] Kim K, Jahan S A, Kabir E, et al. A review of airborne polycyclic aromatic hydrocarbons (PAHs) and their human health effects [J]. Environment International, 2013,60:71-80.
[63] Font R, Aracil I, Fullana A, et al. Semivolatile compounds in pyrolysis of polyethylene [J]. Journal of Analytical and Applied Pyrolysis, 2003,68-9:599-611.
[64] Onwudili J A, Insura N, Williams P T. Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time [J]. Journal of Analytical and Applied Pyrolysis, 2009,86(2):293-303.
[65] Zhou H, Wu C, Onwudili J A, et al. Polycyclic aromatic hydrocarbons (PAH) formation from the pyrolysis of different municipal solid waste fractions [J]. Waste Management, 2015,36:136-146.
[66] Mohseni-Bandpei A, Majlesi M, Rafiee M, et al. Polycyclic aromatic hydrocarbons (PAHs) formation during the fast pyrolysis of hazardous health-care waste [J]. Chemosphere, 2019,227:277-288.
[67] Li X H, Jia Y S, Chen D H, et al. Study of bifunctional calcium-based catalysts for PCDD/Fs removal in medical waste pyrolysis- combustion process [J]. Chemical Engineering and Processing-Process Intensification, 2023,188:109377.
[68] 纪莎莎,李晓东,徐旭,等.关于医疗垃圾飞灰中二噁英在惰性气氛下的低温热脱附研究[J]. 环境科学, 2012,33(11):3999-4005. Ji S S, Li X D, Xu X, et al. Low-temperature thermal treatment of dioxin in medical waste fly ash under unert atmosphere [J]. Environmental Science, 2012,33(11):3999-4005.
[69] 吴挺.医疗垃圾热解气化理论与实验研究[D]. 天津:天津大学, 2005. Wu T. Theory and experiment study on pyrolysis/gasification of medical wastes [D]. Tianjin: Tianjin University, 2005.
[70] Chen D, Yin L, Wang H, et al. Pyrolysis technologies for municipal solid waste: A review (reprinted from waste management) [J]. Waste Management, 2015,37:116-136.
[71] Liu J, Fu H, Zhou G, et al. Preparation of aromatic hydrocarbons from fast pyrolysis of waste medical mask catalyzed by modified HZSM-5[J]. Journal of Analytical and Applied Pyrolysis, 2023,169:105797.
[72] Peng Y, Wang X, Fan L, et al. Conversion of low-density polyethylene into monocyclic aromatic hydrocarbons through continuous microwave pyrolysis with ex-situ dual-catalyst beds [J]. Journal of Cleaner Production, 2023,418:138039.
[73] Qin L, Xu Z, Zhao B, et al. Kinetic study on high-temperature gasification of medical plastic waste coupled with hydrogen-rich syngas production catalyzed by steel-converter ash [J]. Journal of the Energy Institute, 2022,102:14-21.
[74] Ooi X Y, Gao W, Ong H C, et al. Overview on catalytic deoxygenation for biofuel synthesis using metal oxide supported catalysts [J]. Renewable & Sustainable Energy Reviews, 2019,112:834-852.
[75] Cai X, Du C. Thermal plasma treatment of medical waste [J]. Plasma Chemistry and Plasma Processing, 2021,41(1):1-46.
[76] Tzeng C C, Kuo Y Y, Huang T F, et al. Treatment of radioactive wastes by plasma incineration and vitrification for final disposal [J]. Journal of Hazardous Materials, 1998,58(1-3):207-220.
[77] 张璐,严建华,杜长明,等.热等离子体熔融固化模拟医疗废物的研究[J]. 环境科学, 2012,33(6):2104-2109. Zhang L, Yan J H, Du C M, et al. Study on vitrification of simulated medical wastes by thermal plasma [J]. Environmental Science, 2012, 33(6):2104-2109.
[78] 万益琴,王应宽,刘玉环,等.生物质微波裂解技术的研究进展[J]. 农机化研究, 2010,32(3):8-14. Wan Y Q, Wang Y K, Liu Y H, et al. Research advances in microwave assisted pyrolysis of biomass [J]. Journal of Agricultural Mechanization Research, 2010,32(3):8-14
[79] 桂成民.微波热解制备污泥生物炭研究[D]. 广州:广东工业大学, 2015. Gui C M. Microwave pyrolysis to perpare sewage sludge biochar [D]. Guangzhou: Guangdong University of Technology, 2015.
[80] 徐青,凌长明,李军.生活垃圾的微波裂解特性[J]. 农业工程学报, 2012,28(S1):192-196. Xu Q, Ling C M, Li J. Property of microwave pyrolysis of municipal solid waste [J]. Transactions of the Chinese Society of Agricultural Engineering, 2012,28(S1):192-196.
[81] Domínguez A, Menéndez J A, Inguanzo M, et al. Production of bio-fuels by high temperature pyrolysis of sewage sludge using conventional and microwave heating [J]. Bioresource Technology, 2006,97(10):1185-1193.
[82] Tian Y, Zuo W, Ren Z, et al. Estimation of a novel method to produce bio-oil from sewage sludge by microwave pyrolysis with the consideration of efficiency and safety [J]. Bioresource Technology, 2011,102(2):2053-2061.
[83] 张惠,王质彬,綦雯雯,等.浅谈微波裂解技术在生物质能源中的应用[J]. 农产品加工(学刊), 2011,(11):113-117. Zhang H, Wang Z B, Qi W W, et al. The application of microwave cradking in biomass energy [J]. Academic Periodical of Farm Products Processing, 2011,(11):113-117.
[84] Chao Y, Liu B, Rong Q, et al. Mechanism of microwave-assisted iron-based catalyst pyrolysis of discarded COVID-19masks [J]. Waste Management, 2023,155:77-86.
[85] 王政,韩俊淑,吴丽华,等.车载医疗垃圾热解处理新技术应用研究[J]. 医疗卫生装备, 2015,36(5):104-106. Wang Z, Han J S, Wu L H, et al. Application research on new technology for on-board medical waste pyrolysis [J]. Chinese Medical Equipment Journal, 2015,36(5):104-106.
[86] Dong Y, Wei L, Wang S, et al. Design and performance evaluation of integrating the waste heat recovery system (WHRS) for a silicon arc furnace with plasma gasification for medical waste [J]. Entropy, 2023, 25(4):595.
[87] 韩俊淑,吴丽华,张文昌,等.一种车载医疗垃圾热解炉设计[J]. 医疗卫生装备, 2015,36(5):102-103. Han J S, Wu L H, Zhang W C, et al. Design of on-board medical waste pyrolysis furnace [J]. Chinese Medical Equipment Journal, 2015, 36(5):102-103.
[88] 恒誉环保.国内首套工业连续化医废热解装备进驻郑州[EB/OL]. http://www.niutech.com/2022/Company-News_0429/227.html. Hengyu. The first set of industrial continuous medical waste pyrolysis equipment in China was stationed in Zhengzhou [EB/OL]. http://www.niutech.com/2022/Company-News_0429/227.html.
[89] 高陵区政府办.高陵年计划投资4.7亿元8项目三季度集中开工[EB/OL].https://www.xa.gov.cn/gk/zdjsxm/xmsg/62f5fb4df8fd1c4c2110463b.html. Gaoling District Government Office. Gaoling plans to invest 470million yuan in the third quarter of the 8projects [EB/OL]. https://www.xa.gov.cn/gk/zdjsxm/xmsg/62f5fb4df8fd1c4c2110463b.html.
[90] Al-Salem S M, Antelava A, Constantinou A, et al. A review on thermal and catalytic pyrolysis of plastic solid waste (PSW) [J]. Journal of Environmental Management, 2017,197:177-198.
[91] Paraschiv M, Kuncser R, Tazerout M, et al. New energy value chain through pyrolysis of hospital plastic waste [J]. Applied Thermal Engineering, 2015,87:424-433.
[92] Su G, Ong H C, Ibrahim S, et al. Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges [J]. Environmental Pollution, 2021,279:116934.
[93] Chen W, Lin B, Lin Y, et al. Progress in biomass torrefaction: Principles, applications and challenges [J]. Progress in Energy and Combusion Science, 2021,82:100887.
[94] Perugini F, Mastellone M L, Arena U. Life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes [J]. Environmental Progress, 2005,24(2):137-154.
[95] Hong J, Zhan S, Yu Z, et al. Life-cycle environmental and economic assessment of medical waste treatment [J]. Journal of Cleaner Production, 2018,174:65-73.
[96] Su G, Zulkifli N W M, Ong H C, et al. Co-pyrolysis of medical protective clothing and oil palm wastes for biofuel: Experimental, techno-economic, and environmental analyses [J]. Energy, 2023,273:127221.
[97] 贾永胜.医疗废物热解脱氯机制及两级焚烧二噁英控制研究[D]. 武汉:华中科技大学, 2022. Jia Y S. Dechlorination mechanism of pyrolysis of medical waste and the control of dioxins by two-stage incineration [D]. Wuhan: Huazhong University of Science and Technology, 2022.
[98] Klemes J J, Van Fan Y, Tan R R, et al. Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19[J]. Renewable & Sustainable Energy Reviews, 2020,127:109883.
[99] Liu Y, Zhai Y, Li S, et al. Production of bio-oil with low oxygen and nitrogen contents by combined hydrothermal pretreatment and pyrolysis of sewage sludge [J]. Energy, 2020,203:117829.
[100] Meyer P A, Snowden-Swan L J, Jones S B, et al. The effect of feedstock composition on fast pyrolysis and upgrading to transportation fuels: Techno-economic analysis and greenhouse gas life cycle analysis [J]. Fuel, 2020,259:116218.
[101] Chen F, Lou J, Hu J, et al. Study on the relationship between crisis awareness and medical waste separation behavior shown by residents during the COVID-19 epidemic [J]. Science the Total Environment, 2021,787:147522.
[102] 国家卫生健康委.关于印发医疗废物分类目录(2021年版)的通知[EB/OL]. http://www.gov.cn/zhengce/zhengceku/2021-12/02/content_5655394.htm. National Health Commission. Notice on the issuance of the classified catalogue of medical waste (2021edition). [EB/OL]. http://www.gov.cn/zhengce/zhengceku/2021-12/02/content_5655394.htm.
[103] 张胜田,李梅,李群,等.国内外医疗废物管理与处置现状分析及对策建议[J]. 生态与农村环境学报, 2020,36(12):1505-1513. Zhang S T, Li M, Li Q, et al. Analysis of the disposal of medical waste management at home and abroad and suggestions on countermeasures [J]. Journal of Ecology and Rural Environment, 2020,36(12):1505-1513.
[104] Mazzei H G, Specchia S. Latest insights on technologies for the treatment of solid medical waste: A review [J]. Journal of Environmental Chemical Engineering, 2023,11(2):109309.
[105] 罗叶辉.上海市公立医院垃圾分类政策执行问题研究——以A医院为例[D]. 上海:华东师范大学, 2023. Luo Y H. Research on the implementation of waste classification policy in Shanghai public hospitals—take hospital A as an example [D]. Shanghai: East China Normal University, 2023.