|
|
|
| Heat treatment characteristics and kinetics of typical biodegradable plastics |
| GAO Kang1,2, RUAN Jiu-li1, WANG Yi-bo1, ZHANG Jian-qiang2, GUO Yu-wen1 |
1. State Key Laboratory of Environmental Protection and Ecological Industry, China Research Academy of Environment Sciences, Beijing 100012, China;
2. Faculty of Geosciences and Environment Engineering, Southwest Jiaotong University, Chengdu 610059, China |
|
|
|
|
Abstract In order to explore the characteristics of biodegradable plastics in the heat treatment process, the weight-loss characteristics of biodegradable plastics (BP1) composed of the polylactide(PLA) and Poly(butyleneadipate-co-terephthalate) (PBAT) were analyzed by thermogravimetric analyzers at different heating rates (10, 20 and 30℃/min), and the reaction process of BP1in nitrogen atmosphere and air atmosphere was not completed in one step, and there were obvious two-step weight-loss processes in the main reaction stages. The mass loss rates of the two main reaction stages under nitrogen and air atmosphere reached 87.99%~89.64% and 84.99%~86.88%, respectively, and there was obvious overlap between the temperature ranges of the two reaction stages. The kinetic parameters were calculated by using iso-conversional method of Flynn-Wall-Qzawa(FWO)、Kissinger-Akahira-Sunose (KAS)、Starink, and the average activation energy E of BP1in stage 1 and stage 2 under nitrogen atmosphere was 88.95 and 90.92kJ/mol, respectively, and the average activation energy E of stage 1 and stage 2 under air atmosphere was 67.23 and 91.27kJ/mol, respectively. The kinetic reaction mechanism was determined by Master-plots method based on 10℃/min, which showed that main reaction stage of BP1conformed to the random nucleation and nuclear growth model (An), but the number of reaction stages was different, indicating that the different atmospheres of nitrogen and air did not affect its reaction mechanism, but the generation and inactivation rate of the active point were different.
|
|
Received: 20 June 2023
|
|
|
|
|
|
| [1] |
Cheng H, Hu Y.Municipal solid waste (MSW) as a renewable source of energy:Current and future practices in China [J].Bioresource Technology, 2010,101(11):3816-3824.
|
| [2] |
陈国强,王颖.中国"生物基材料"研究和产业化进展[J].生物工程学报, 2015,31(6):955-967.Chen G Q, Wang Y.Research and industrialization progress of "bio-based materials" in China [J].Chinese Journal of Biotechnology, 2015,31(6):955-967.
|
| [3] |
王燕萍,邓义祥,张承龙,等.我国一次性塑料污染管理对策研究[J].环境科学研究, 2020,33(4):1062-1068.Wang Y P, Deng Y X, Zhang C L, et al.Research on the management countermeasures of disposable plastic pollution in China [J].Research of Environmental Sciences, 2020,33(4):1062-1068.
|
| [4] |
侯冠一,翁云宣,刁晓倩,等.生物降解塑料产业现状与未来发展[J].中国材料进展, 2022,41(1):52-67.Hou G Y, Weng Y X, Diao X Q, et al.Current situation and future development of biodegradable plastics industry [J].Progress in Chinese Materials, 2022,41(1):52-67.
|
| [5] |
Colnik M, Hrncic M K, Skerget M, et al.Biodegradable polymers, current trends of research and their applications, a review [J].Chemical Industry & Chemical Engineering Quarterly, 2020,26(4):401-418.
|
| [6] |
郑涵月,孙姣霞,向红,等.生物可降解塑料PBAT/PLA在典型非生物降解环境下的降解[J].中国环境科学, 2023,43(8):4247-4254.Zheng H Y, Sun J X, Xiang H, et al.Degradation of biodegradable plastic PBAT/PLA in typical non-biodegradable environment [J].China Environmental Science, 2023,43(8):4247-4254.
|
| [7] |
Bandini F, Frache A, Ferrarini A, et al.Fate of Biodegradable polymers under industrial conditions for anaerobic digestion and aerobic composting of food waste [J].Journal of Polymers and the Environment, 2020,28(9):2539-2550.
|
| [8] |
金琰,蔡凡凡,王立功,等.生物可降解塑料在不同环境条件下的降解研究进展[J].生物工程学报, 2022,38(5):1784-1808.Jin Y, Cai F F, Wang L G, et al.Research progress on degradation of biodegradable plastics under different environmental conditions [J].Chinese Journal of Biotechnology, 2022,38(5):1784-1808.
|
| [9] |
俞学如,陈森,梁思嘉,等.可降解塑料的使用现状及其潜在环境风险[J].环境化学, 2023,42(1):29-40.Yu X R, Chen S, Liang S J, et al.Status quo of use of degradable plastics and their potential environmental risks [J].Environmental Chemistry, 2023,42(1):29-40.
|
| [10] |
Wei R, Zimmermann W.Microbial enzymes for the recycling of recalcitrant petroleum-based plastics:how far are we? [J].Microbial Biotechnology, 2017,10(6):1308-1322.
|
| [11] |
Filiciotto L, Rothenberg G.Biodegradable plastics:Standards, policies, and impacts [J].ChemSusChem, 2021,14(1):56-72.
|
| [12] |
Nandakumar A, Chuah J A, Sudesh K.Bioplastics:A boon or bane? [J].Renewable & Sustainable Energy Reviews, 2021,147:111237.
|
| [13] |
温宗国.可降解塑料的环境影响评价与政策支撑研究项目报告[R].北京:清华大学, 2022.Wen Z G.Report of the research project on environmental impact assessment and policy support of degradable plastics [R].Beijing:School of Environment, Tsinghua University, 2022.
|
| [14] |
Sirisinha K, Somboon W.Melt characteristics, mechanical, and thermal properties of blown film from modified blends of poly (butylene adipate-co-terephthalate) and poly(lactide) [J].Journal of Applied Polymer Science, 2012,124(6):4986-4992.
|
| [15] |
Gao X, Xie D, Yang C.Effects of a PLA/PBAT biodegradable film mulch as a replacement of polyethylene film and their residues on crop and soil environment [J].Agricultural Water Management, 2021,255:107053.
|
| [16] |
GB/T 212-2008煤的工业分析方法[S].GB/T 212-2008 Proximate analysis of coal [S].
|
| [17] |
Qu Y, Li A, Wang D, et al.Kinetic study of the effect of in-situ mineral solids on pyrolysis process of oil sludge [J].Chemical Engineering Journal, 2019,374:338-346.
|
| [18] |
李唯实,黄泽春,雷国元,等.典型农药废盐热处理过程动力学特征[J].中国环境科学, 2018,38(7):2691-2698.Li W S, Huang Z C, Lei G Y, et al.Kinetic characteristics of typical pesticide waste salt heat treatment process [J].China Environmental Science, 2018,38(7):2691-2698.
|
| [19] |
Burnham A K, Dinh L N.A comparison of isoconversional and model-fitting approaches to kinetic parameter estimation and application predictions [J].Journal of Thermal Analysis and Calorimetry, 2007,89(2):479-490.
|
| [20] |
Zhao M, Cui X, Ji G, et al.Alkaline thermal treatment of cellulosic biomass for H2 production using Ca-based bifunctional materials [J].ACS Sustainable Chemistry & Engineering, 2019,7(1):1202-1209.
|
| [21] |
Vuppaladadiyam A K, Memon M Z, Ji G, et al.Thermal characteristics and kinetic analysis of woody biomass pyrolysis in the presence of bifunctional alkali metal ceramics [J].ACS Sustainable Chemistry & Engineering, 2019,7(1):238-248.
|
| [22] |
尹凤福,庄虔晓,常天浩,等.外卖塑料包装热解动力学研究——基于无模型和模型拟合法[J].中国环境科学, 2021,41(4):1756-1764.Yin F F, Zhuang Q X, Chang T H, et al.Pyrolysis kinetics of takeaway plastic packaging:Based on model-free and model fitting method [J].China Environmental Science, 2021,41(4):1756-1764.
|
| [23] |
Chen J, Mu L, Jiang B, et al.TG/DSC-FTIR and Py-GC investigation on pyrolysis characteristics of petrochemical wastewater sludge [J].Bioresource Technology, 2015,192:1-10.
|
| [24] |
Ding Z, Chen H, Liu J, et al.Pyrolysis dynamics of two medical plastic wastes:Drivers, behaviors, evolved gases, reaction mechanisms, and pathways [J].Journal of Hazardous Materials, 2021,402:123472.
|
| [25] |
江国栋,魏利平,滕海鹏,等.基于热重法的准东煤等转化率热解动力学模型[J].化工学报, 2017,68(4):1415-1422.Jiang G D, Wei L P, Teng H P, et al.Thermogravimetric pyrolysis kinetics model of Zhundong coal conversion rate based on thermogravimetric method [J].Ciesc Journal, 2017,68(4):1415-1422.
|
| [26] |
姚灿,田红,覃静萍,等.基于等转化率法的芒草和玉米秸秆热解特性及动力学研究[J].林产化学与工业, 2018,38(1):93-100.Yao C, Tian H, Qin J P, et al.Pyrolysis characteristics and kinetics of miscanthus grass and corn straw based on equal conversion rate method [J].Chemistry and Industry of Forest Products, 2018,38(1):93-100.
|
| [27] |
Aslan D I, Parthasarathy P, Goldfarb J L, et al.Pyrolysis reaction models of waste tires:Application of Master-Plots method for energy conversion via devolatilization [J].Waste Management, 2017,68:405-411.
|
| [28] |
Wanjun T, Yuwen L, Hen Z, et al.New temperature integral approximate formula for non-isothermal kinetic analysis [J].Journal of Thermal Analysis and Calorimetry, 2003,74(1):309-315.
|
| [29] |
Xiang S, Feng L, Bian X, et al.Evaluation of PLA content in PLA/PBAT blends using TGA [J].Polymer Testing, 2020,81:106211.
|
| [30] |
Wu J, Chen T, Luo X, et al.TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS [J].Waste Management, 2014,34(3):676-682.
|
| [31] |
Kim S, Yang W, Lee H S, et al.Effectiveness of CO2-mediated pyrolysis for the treatment of biodegradable plastics:A case study of polybutylene adipate terephthalate/polylactic acid mulch film [J].Journal of Cleaner Production, 2022,372:133763.
|
| [32] |
张瑜涛.废塑料回转窑固体热载体热解特性研究[D].大连:大连理工大学, 2021.
|
| [33] |
Lambert S, Wagner M.Formation of microscopic particles during the degradation of different polymers [J].Chemosphere, 2016,161:510-517.
|
|
|
|
