|
|
|
| Catalytic oxidation of HCHO over Mn-based metal oxide catalysts at room temperature |
| HUANG Qiong1,2,3, BAI Meng-tian2, REN Chao2, WANG Guang-hong2, TAO Tao1,2,3, ZHAO Yun-xia1,2,3, CHEN Min-dong1,2,3 |
1. Jiangsu Collaborative Innovation Center of Atmospheric Environment and Equipment Technologies, Nanjing University of Information Science & Technology, Nanjing 210044, China;
2. School of Environmental Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China;
3. Jiangsu Key Laboratory of Atmospheric Environmental Monitoring & Pollution Control, Nanjing University of Information Science & Technology, Nanjing 210044, China |
|
|
|
|
Abstract A series of Mn-Ce-O mixed oxide catalysts were prepared by thehydrothermal method with using of Mn(NO3)2 and KMnO4. The orthogonal experiment was designed to get the best of technological parameter. The effect of the molar ratio of Mn/Ce, hydrothermal reaction temperature, calcinations temperature and time on the catalytic properties for the catalytic oxidation of formaldehyde were investigated. These catalysts were characterized by XRD, SEM, TEM and IR techniques. The results showed that the Mn-Ce-O mixed oxide catalysts with Mn/Ce molar ratio of 1, hydrothermal reaction temperature setting as 180℃, calcining with 350℃ exhibited the highest activity and well stability with room temperature, the conversion of formaldehyde was 94.2% with 36h. The activities of these catalysts were not positively related to the specific surface areas, but were closely related to the structural morphology. However, the structure of these catalysts depended mainly on the hydrothermal reaction temperature, and then followed by the Mn/Ce molar ratio.
|
|
Received: 23 June 2017
|
|
|
|
|
|
| [1] |
Fan Z Y, Zhang Z X, Fang W J, et al. Low-temperature catalytic oxidation of formaldehyde over Co3O4 catalystsprepared using various precipitants[J]. Chinese Journal of Catalysis, 2016,37(6):947-954.
|
| [2] |
代伟,周亚平,周理.SBA-15介孔分子筛负载金属酞菁催化氧化甲醛[J]. 中国环境科学, 2006,26(4):400-403.
|
| [3] |
叶青,闫立娜,罗才武,等. Au负载OMS-2催化剂的制备及其低温催化氧化性能[J]. 中国环境科学, 2012,32(4):609-616.
|
| [4] |
Wang L F, Sakurai M, Kameyama H. Study of catalytic decomposition of formaldehyde on Pt/TiO2 alumite catalyst at ambient temperature[J]. Journal of Hazardous Materials, 2009, 167(1):399-405.
|
| [5] |
Kim S S, Park K H, Hong S C. A study on HCHO oxidation characteristics at room temperature using a Pt/TiO2 Catalyst[J]. Applied Catalysis A:General, 2011,398(1):96-103.
|
| [6] |
Li C Y, Shen Y N, Jia M L, et al. Catalytic combustion of formaldehyde on gold/iron-oxide catalysts[J]. Catalysis Communications, 2008,9(1):355-361.
|
| [7] |
Álvarez-Galván M C, Pawelec B, Peña O'Shea V A, et al. Formaldehyde/Methanol Combustion on Alumina-Supported Manganese-Palladium Oxide Catalyst[J]. Applied Catalysis B:Environmental, 2004,51(2):83-91.
|
| [8] |
Huang H B, Leung Y C. Complete elimination of indoor formaldehyde over supported Pt catalysts with extremely low Pt content at ambient temperature[J]. Journal of Catalysis, 2011, 280(1):60-67.
|
| [9] |
Bai B Y, Qiao Q, Li J H, et al. Progress in research on catalysts for catalytic oxidation of formaldehyde[J]. Chinese Journal of Catalysis, 2016,37(1):102-122.
|
| [10] |
An N H, Yu Q S, Liu G, et al. Complete oxidation of formaldehyde at ambient temperature over supported Pt/Fe2O3 catalysts prepared by colloid-deposition method[J]. Journal of Hazardous Materials, 2011,186(1):1392-1397.
|
| [11] |
Zhang C B, Li Y B, Wang Y F, et al. Sodium-Promoted Pd/TiO2 for Catalytic Oxidation of Formaldehyde at Ambient Temperature[J]. Environment Science Technology, 2014,48(10):5816-5822.
|
| [12] |
Tang X F, Li Y G, Huang X M, et al. MnOx-CeO2 mixed oxide catalysts for complete oxidation of formaldehyde:Effect of preparation method and calcinations temperature[J]. Applied Catalysis B:Environmental, 2006,62(1):265-273.
|
| [13] |
Tang X F, Chen J L, Huang X M, et al. Pt/MnOx-CeO2 catalysts for the complete oxidation of formaldehyde at ambient temperature[J]. Applied Catalysis B:Environmental, 2008,81(1):115-121.
|
| [14] |
黄琼,马文娇,严小康,等.堇青石负载稀土铈基催化剂催化燃烧苯的性能研究[J]. 功能材料, 2012,43(22):3079-3083.
|
| [15] |
Zhou L, Zhang J, He J H, et al. Control over the morphology and structure of manganese oxide by tuning reaction conditions and catalytic performance for formaldehyde oxidation[J]. Materials Research Bulletin, 2011,46(10):1714-1722.
|
| [16] |
Ma L, Wang D S, Li J H, et al. Ag/CeO2 nanospheres:Efficient catalysts for formaldehyde oxidation[J]. Applied Catalysis B:Environmental, 2014,148-149(6):36-43.
|
| [17] |
Tian H, He J H, Liu L L, et al. Effects of textural parameters and noble metal loading on the catalytic activity of cryptomelane-type manganese oxides for formaldehyde oxidation[J]. Ceramics International, 2013,39(1):315-321.
|
| [18] |
侯静涛,李远志. MNO2基催化剂的微结构调控及其催化净化VOCs性能[D]. 武汉:武汉理工大学, 2014.
|
| [19] |
杨振前,胡建强.银/二氧化锰纳米材料的制备及其甲醛催化氧化性能研究[D]. 广州:华南理工大学, 2015.
|
| [20] |
Li H J, Qi G S, Tana, et al. Low-temperature oxidation of ethanol over a Mn0.6Ce0.4O2 mixed oxide[J]. Applied Catalysis B:Environmental, 2011,103(1):54-61.
|
| [21] |
庞光龙,张韫宏,麻春艳. MnOx基催化剂上甲醛室温催化氧化反应的研究[D]. 北京:北京理工大学, 2015.
|
| [22] |
Huang Q, Ma W J, Yan X K, et al. Photocatalytic decomposition of gaseous HCHO by ZrxTi1-xO2 catalysts under UV-vis light irradiation with an energy-saving lamp[J]. Journal of Molecular Catalysis A:Chemical, 2013,366(1):261-265.
|
| [23] |
Hou J T, Li Y Z, Liu L L, et al. Effect of giant oxygen vacancy defects on the catalytic oxidation of OMS-2 nanorods[J]. Journal of Materials Chemistry A, 2013,1(23):6736-6741.
|
|
|
|
