PDF(5208 KB)
混合基质3D打印可见光催化系统对病毒气溶胶的去除
孔亚东, 石磊, 柳蒙蒙, 张巍, 程荣, 郑祥
中国环境科学 ›› 2020, Vol. 40 ›› Issue (11) : 5055-5062.
PDF(5208 KB)
PDF(5208 KB)
混合基质3D打印可见光催化系统对病毒气溶胶的去除
Visible light photocatalytic system made by polymer matrix composites 3D printing for virus aerosol removal
利用3D打印灵活可控的特点和复合材料混合打印的优势，将可见光响应的ZnO/g-C3N4催化剂掺入ABS塑料，利用3D打印制成催化剂均匀稳定分布的光催化系统，使用流体动力学仿真模拟对反应器结构进行优化设计，用于处理相对密闭的室内空间中的病毒气溶胶.结果表明，病毒气溶胶比细菌气溶胶具有更强的抗逆性，添加螺旋导流板可以显著提升反应器传质性能并有效改善系统光催化效果，以提高对病毒气溶胶的去除率.以商业LED灯为光源的螺旋式反应器对高浓度病毒气溶胶（MS2、PhiX174噬菌体）和细菌气溶胶（大肠杆菌）具有高效去除效果，在3.75min停留时间可以实现对气溶胶的完全去除.
Take the advantage of design flexibility of polymer matrix composites 3D printing, the visible light-responsive ZnO/g-C3N4 catalyst was incorporated into ABS plastic to form a photocatalytic system with uniform and stable catalyst distribution. The reactor structure was optimized using Computational Fluid Dynamics simulation and the photocatalytic reactor was used to treat virus aerosols in relatively closed indoor areas. Results showed that viruses were more resistant than bacteria, and the addition of spiral baffles can increase the removal rate of virus aerosols, due to the significant improvement in the mass transfer performance of photocatalytic system. The spiral photocatalytic system can efficiently remove high-concentration virus (MS2, PhiX174phage) and bacterial (E. coli) aerosols with the help of commercial LED lights. Furthermore, photocatalytic system can remove virus aerosols and bacterial aerosols at a residence time of 3.75min.
3D printing / model virus / photocatalytic reactor / virus aerosol
[1] 吕文洲,乔宇祥,刘英.纳米TiO2-光催化灭活水中噬菌体MS2[J]. 中国环境科学, 2015,35(8):2532-2538. Lu W Z, Qiao Y X, Liu Y. Inactivation of bacteriophage MS2 in water by TiO2 nanoparticles coupled with light[J]. China Environmental Science, 2015,35(8):2532-2538.
[2] 刘炫圻,冯萃敏,汪长征,等.紫外线-茶多酚联用对供水管网的消毒效果[J]. 中国环境科学, 2020,40(4):1563-1569. Liu X Q, Feng C M, Wang C Z, et al. Effect of combined disinfection using ultraviolet and tea polyphenols in network[J]. China Environmental Science, 2020,40(4):1563-1569.
[3] 柳文菁,董志勇,杨杰,等.三角孔多孔板水力空化杀灭原水中病原微生物[J]. 中国环境科学, 2018,38(8):3011-3017. Liu W Q, Dong Y Z, Yang J, et al. Killing pathogenic microorganism by hydrodynamic cavitation due to triangular multi-orifice plates[J]. China Environmental Science, 2018,38(8):3011-3017.
[4] 王丽,黄君礼,孙荣芳,等.二氧化氯对水中流感病毒的消毒效果[J]. 中国环境科学, 2001,21(3):256-258. Wang L, Huang, J L, Sun R F, et al. Inactivation effect of chlorine dioxide on influenza viruses in water[J]. China Environmental Science, 2001,21(3):256-258.
[5] Haas C N, Rose J B, Gerba C P. Quantitative Microbial Risk Assessment[M]. Hoboken, New Jersey:John Wiley & Sons, 2014.
[6] 王艳秋,孙利群,刘晓杰,等.二氧化氯气体用于生物安全三级实验室消毒效果的评价[J]. 中国消毒学杂志, 2015,32(1):13-15. Wang Y Q, Sun L Q, Liu X J, et al. Evaluation of disinfection effect of chlorine dioxide gas on biosafety levels-Ⅲ laboratory[J]. Chinese Journal of Disinfection, 2015,32(1):13-15.
[7] Lin C Y, Li C S. Control effectiveness of ultraviolet germicidal irradiation on bioaerosols[J]. Aerosol Science and Technology, 2002, 36(4):474-478.
[8] Chen F, Yang X, Mak H K C, et al. Photocatalytic oxidation for antimicrobial control in built environment:a brief literature overview[J]. Building and Environment, 2010,45(8):1747-1754.
[9] Devahasdin S, Fan C, Li K, et al. TiO2photocatalytic oxidation of nitric oxide:transient behavior and reaction kinetics[J]. Journal of Photochemistry and Photobiology A:Chemistry, 2003,156(1-3):161-170.
[10] Zhao X, Lv L, Pan B, et al. Polymer-supported nanocomposites for environmental application:a review[J]. Chemical Engineering Journal, 2011,170(2):381-394.
[11] Su C, Tong Y, Zhang M, et al. TiO2nanoparticles immobilized on polyacrylonitrile nanofibers mats:a flexible and recyclable photocatalyst for phenol degradation[J]. RSC Advances, 2013,3(20):7503-7512.
[12] Im J S, Kim M I, Lee Y S. Preparation of PAN-based electrospun nanofiber webs containing TiO2 for photocatalytic degradation[J]. Materials Letters, 2008,62(21/22):3652-3655.
[13] Wang X, Jiang M, Zhou Z, et al. 3D printing of polymer matrix composites:A review and prospective[J]. Composites Part B:Engineering, 2017,110:442-458.
[14] Jo W, Yoon B J, Lee H, et al. 3D printed hierarchical gyroid structure with embedded photocatalyst TiO2 nanoparticles[J]. 3D Printing And Additive Manufacturing, 2017,4(11):33-42.
[15] Arango M A T, Kwakye-Ackah D, Agarwal S, et al. Environmentally friendly engineering and three-dimensional printing of TiO2 hierarchical mesoporous cellular architectures[J]. ACS Sustainable Chemistry & Engineering, 2017,5(11):10421-10429.
[16] Elkoro A, Casanova I. 3D printing of structured nanotitania catalysts:a novel binder-free and low-temperature chemical sintering method[J]. 3D Printing and Additive Manufacturing, 2018,5(3):1-8.
[17] Son S, Jung P H, Park J, et al. Customizable 3D-printed architecture with ZnO-based hierarchical structures for enhanced photocatalytic performance[J]. Nanoscale, 2018,10(46):21696-21703.
[18] Viskadourakis Z, Sevastaki M, Kenanakis G. 3D structured nanocomposites by FDM process:a novel approach for large-scale photocatalytic applications[J]. Applied Physics A, 2018,124(585):584-592.
[19] Hreiz R, Gentric C, Midoux N. Numerical investigation of swirling flow in cylindrical cyclones[J]. Chemical Engineering Research and Design, 2011,89(12):2521-2539.
[20] Dong F, Wu L W, Sun Y J, et al. Efficient synthesis of polymeric g-C3N4 layered materials as novel efficient visible light driven photocatalysts[J]. Journal of Materials Chemistry, 2011,21:15171-15174.
[21] Yang C, Xue Z, Qin J, et al. Heterogeneous structural defects to prompt charge shuttle in g-C3N4 plane for boosting visible-light photocatalytic activity[J]. Applied Catalysis B:Environmental, 2019, 259:118094.
[22] Gong Y, Li H K, Jiao C, et al. Effective hydrogenation of g-C3N4 for enhanced photocatalytic performance revealed by molecular structure dynamics[J]. Applied Catalysis B:Environmental, 2019,250:63-70.
[23] Zhang C, Yuan X G, Luo Y Q, et al. Prediction of species concentration distribution using a rigorous turbulent mass diffusivity model for bubble column reactor simulation Part I:Application to chemisorption process of CO2 into NaOH solution[J]. Chemical Engineering Science, 2018,184:167-171.
[24] Cho M, Kim J, Kim J Y, et al. Mechanisms of Escherichia coli inactivation by several disinfectants[J]. Water Research, 2010,44(11):3410-3418.
[25] Tseng C C, Li C S. Ozone for inactivation of aerosolized bacteriophages[J]. Aerosol Science & Technology, 40(9):683-689.
[26] 代小英,许欣,陈昭斌,等.纳米银水溶液对噬菌体和细菌杀灭效果的观察[J]. 中国消毒学杂志, 2008,25(3):242-244. Dai X X, Xu X, Chen Z B, et al. Observation on microbicidal efficacy of silver nanoparticles aqueous solution to bacteriophages and bacteria[J]. Chinese Journal of Disinfection, 2008,25(3):242-244.
[27] Sudharsanam S, Swaminathan S, Ramalingam A, et al. Characterization of indoor bioaerosols from a hospital ward in a tropical setting[J]. African Health Sciences, 2012,12(2):217-225.
[28] Godini H, Azimi F, Kamarehie B, et al. Bio-aerosols concentrations in different wards of Khorramabad Hospital, Iran, 2013[J]. International Journal of Environmental Health Engineering, 2015,4:23.
[29] Li Y, Huang X, Yu I T, et al. Role of air distribution in SARS transmission during the largest nosocomial outbreak in Hong Kong[J]. Indoor Air, 2005,15(2):83-95.
[30] Sornboot J, Aekplakorn W, Ramasoota P, et al. Assessment of bioaerosols in tuberculosis high-risk areas of health care facilities in central Thailand[J]. Asian Biomedicine, 2019,12(2):55-63.
[31] Lee B U, Hong I G, Lee D H, et al. Bacterial Bioaerosol Concentrations in Public Restroom Environments[J]. Aerosol and Air Quality Research, 2012,12(2):251-255.
[32] Thorne P S, Ansley A C, Perry, S S. Concentrations of bioaerosols, odors, and hydrogen sulfide inside and downwind from two types of swine livestock operations[J]. Journal of Occupational and Environmental Hygiene, 2009,6(4):211-220.
[33] Pascual L, Pérez-Luz S, Yáñez M A, et al. Bioaerosol emission from wastewater treatment plants[J]. Aerobiologia, 2003,19:261-270.
[34] GB 37488-2019公共场所卫生指标及限值要求[S]. GB 37488-2019 Health index and limit requirements of public places[S].
国家水体污染控制与治理科技重大专项（2017ZX07102-002）；国家自然科学基金（51778618）
京公网安备 11010802030352号 /
| 〈 |
|
〉 |
