A refuse derived fuel (RDF) molding machine and a Thermogravimetric Analyzer were used to investigate parameters in RDF molding processes and thermal characters of RDF products, respectively. In the process of preparing RDF using bio-drying products, the appropriate parameters of moisture content, particle size and molding pressure were 30%, <1mm and 2MPa, respectively. The range of falling strength of RDF was 95~100% under such condition, which meant high efficiency of molding without any volumetric expansion. The heat value of RDF was relative higher when particle size is 1~2mm than that of others. Thermal characteristics of RDF with the particle size of <1mm were remarkably different from those with the particle size of 1~3mm. The fitting of TG curve was great using first order kinetics equation. The results indicated a great potential of preparing RDF using municipal solid waste after bio-drying.
齐琪, 袁京, 李赟, 张地方, 李国学. 生活垃圾制备RDF工艺参数及其热特性研究[J]. 中国环境科学, 2017, 37(3): 1051-1057.
QI Qi, YUAN Jing, LI Yun, ZHANG Di-fang, LI Guo-xue. Processing parameters and thermal characteristics of RDF based on municipal solid waste. CHINA ENVIRONMENTAL SCIENCECE, 2017, 37(3): 1051-1057.
Cimpan C, Wenzel H. Energy implications of mechanical and mechanical-biological treatment compared to direct waste-to-energy [J]. Waste Management, 2013,33(7):1648-1658.
Malika A, Jacques N, Jaafar E F, et al. Pyrolysis investigation of food wastes by TG-MS-DSC technique [J]. Biomass Conversion and Biorefinery, 2015,6(2):161-172.
[10]
Fernandez J, Gonzalez F, Pesquera C, et al. Study of the Thermal Behavior of Sewage Sludge from a WWTP in Cantabria (Spain) by TG-DSC-MS [J]. Biomass Conversion and Biorefinery, 2012, 29:859-864.
[11]
He F, Yi W M, Bai X Y. Investigation on caloric requirement of biomass pyrolysis using TG-DSC analyzer [J]. Energy Conversion and Management, 2006,47(15/16):2461-2469.
[12]
Yang G L, Chen S N, Yang Z C. Application of Simultaneous TG-DSC Version on Combustion Characteristics Test of Blended Coal [M]. Advanced Materials Research, 2012:512-515.
Fernández J M, Plaza C, Polo A. Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application [J]. Waste Management, 2012,32(1):158-164.
Flynt A, Dean N. A Survey of Popular R Packages for Cluster Analysis [J]. Journal of Educational and Behavioral Statistics, 2016,41(2):205-225.
[21]
Sever A, At?mtay A, Sanin F D. Comparison of fuel value and combustion characteristics of two different RDF samples [J]. Waste Management, 2016,47(b):217-224.
[22]
Rigamonti L, Grosso M, Biganzoli L. Environmental Assessment of Refuse-Derived Fuel Co-Combustion in a Coal-Fired Power Plant [J]. Journal of Industrial Ecology, 2012,16(5):748-760.
Chang N B, Chang Y H, Chen W C. Evaluation of heat value and its prediction for refuse-derived fuel [J]. Science of the Tatal Environmental, 1997,197(1-3):139-148.
[25]
Punin W, Maneewan S, Punlek C. The feasibility of converting solid waste into refuse-derived fuel 5via mechanical biological treatment process [J]. Journal of Material Cycles and Waste Management, 2014,16(4):753-762.
Robinson T, Bronson B, Gogolek P, et al. Sample preparation for thermo-gravimetric determination and thermo-gravimetric characterization of refuse derived fuel [J]. Waste Management, 2016,48:265-274.
[29]
Cheng J, Ringelkulka T, Heikampde J I, et al. Maximum burning rate and fixed carbon burnout efficiency of power coal blends predicted with back-propagation neural network models [J]. Fuel, 2016,172:170-177.
[30]
Chen Y, Mori S, Pan W P. Studying the mechanisms of ignition of coal particles by TG-DTA [J]. Thermochimica Acta, 1996, 275(1):149-158.
[31]
Ozkan A, Banar M. Refuse Derived Fuel (RDF) Utilization in Cement Industry by Using Analytic Network Process (ANP) [J]. 2010,21:769-774.
[32]
Kok M V, Ozbas E, Hicyilmaz C et al. Effect of particle size on the thermal and combustion properties of coal [J]. Thermochimica Aata. 1997,302(1/2):125-130.
[33]
Chouchene A, Jeguirim M, Khiari B, et al. Thermal degradation of olive solid waste: Influence of particle size and oxygen concentration [J]. Resources, Conservation and Recycling, 2010, 54(5):271-277.
Slovák V, Taraba B, Hustad J E. Effect of experimental conditions on parameters derived from TG-DSC measurements of low-temperature oxidation of coal [J]. Journal of Thermal Analysis and Calorimetry, 2010,101(2):641-646.