|
|
Emission factor and inventory for fugitive dust from concrete batching plants in Beijing |
HUANG Yu-hu1, HAN Kai-li1, CHEN Li-yuan2, QI Li-rong3, QU Song1, LI Bei-bei4, QIN Jian-ping1 |
1. National Engineering Research Center of Urban Environmental Pollution Control, Beijing Municipal Research Institute of Environmental Protection, Beijing 100037, China;
2. Beijing Municipal Environmental Protection Bureau, Beijing 100044, China;
3. Beijing Productivity Center, Beijing 100088, China;
4. Capital Normal University, College of Resource Environment and Tourism, Beijing 100048, China |
|
|
Abstract In order to estimate the emission inventory for fugitive dust from concrete batching plants accurately, emission factors for fugitive dust from concrete batching plants in USEPA and SCAQMD were synthesized in this paper, and road silt loading were carried out in typical concrete batching plants in Beijing, emission factors for fugitive dust of production segments and comprehensive process from concrete batching plants were established in Beijing. Combining with fugitive dust managing process from concrete batching plants in Beijing, fugitive dust emission inventory from concrete batching plants in Beijing from 1991 to 2014 was estimated, and predicted for the year of 2015 to 2020. Results showed that the mean value of road silt loading of concrete batching plants is (26.2±11.5)g/m2 in Beijing in 2015, which is 2.4 times as much as the value (11.0g/m2) recommended by SCAQMD. Fugitive dust from concrete batching plants in Beijing before 1995 was uncontrolled, the comprehensive emission factor of PM2.5 was 86g/m3 concrete, the uneven factor of monthly of production output of concrete batching plants in first quarter was 1/3 of other quarters. The comprehensive emission factor of PM2.5 in 2015 was declined 89.4% compared with 1995, and proportion of plant fugitive road dust emission from plants in total emission was increased from 10% to 70%. After implementation of "Beijing's Clean Air Action Plan from 2013~2017", PM2.5 emission from concrete batching plants was fell to 543.1t/a and decreased by 48.3% in 2015 compared with 2013. The contribution of elimination of unqualified concrete batching plants to PM2.5 emission reduction was 18.6%. Fugitive dust emission from concrete batching plants in Beijing concentrates on the fifth ring road to sixth ring road (52%), the emission amount of outside of sixth ring road account for 28% of total amount. In the future, eliminating unqualified concrete batching plants continuously and strengthening road sweep cleaning in plants should be the most important emission reduction efforts of concrete batching plants in Beijing.
|
Received: 10 February 2017
|
|
|
|
|
[1] |
Deligiannis V, Manesis S. Concrete batching and mixing plants:A new modeling and control approach based on global automata[J]. Automation in Construction, 2008,17(4):368-376.
|
[2] |
Azarmi F, Kumar P, Mulheron M. The exposure to coarse, fine and ultrafine particle emissions from concrete mixing, drilling and cutting activities[J]. Journal of Hazardous Materials, 2014,279:268-279.
|
[3] |
Cazacliu B, Ventura A. Technical and environmental effects of concrete production:dry batch versus central mixed plant[J]. Journal of Cleaner Production, 2010,18(13):1320-1327.
|
[4] |
钟连红,李钢,郑权,等.散装水泥与环境保护[J]. 城市管理与科技, 2003,5(2):73-74.
|
[5] |
黄玉虎,李媚,曲松,等.北京城区PM2.5不同组分构成特征及其对大气消光系数的贡献[J]. 环境科学研究, 2015,28(8):1193-1199.
|
[6] |
王凌慧,曾凡刚,向伟玲,等.空气重污染应急措施对北京市PM2.5的削减效果评估[J]. 中国环境科学, 2015,35(8):2546-2553.
|
[7] |
韩力慧,张鹏,张海亮,等.北京市大气细颗粒物污染与来源解析研究[J]. 中国环境科学, 2016,36(11):3203-3210.
|
[8] |
北京市环境保护局.2016年北京市环境状况公报[R]. 北京:北京市环境保护局, 2017.
|
[9] |
张大伟.北京市大气环境PM2.5污染现状及成因研究[R]. 北京:北京市环境保护监测中心, 2014.
|
[10] |
薛亦峰,周震,钟连红,等.北京市混凝土搅拌站颗粒物排放特征研究[J]. 环境科学, 2016,37(1):88-93.
|
[11] |
US EPA. Emission factor documentation for AP-42, Section 11.12Concrete batching[R]. Washington DC:US EPA, 2006.
|
[12] |
DB11/513-2015绿色施工管理规程[S].
|
[13] |
国务院第一次全国污染源普查领导小组办公室.第一次全国污染源普查工业污染源产排污系数手册(2007年版)[M]. 北京:中国环境科学出版社, 2007.
|
[14] |
South Coast Air Quality Management District. Particulate matter (PM) emission factors for processes/equipment at asphalt, cement, concrete, and aggregate product plants[R]. Diamond Bar, CA:SCAQMD, 2012.
|
[15] |
北京市统计局.北京市统计年鉴2016[M]. 北京:中国统计出版社, 2016.
|
[16] |
中国建设部.建建[1996] 93号关于加快预拌混凝土发展的若干意见[R]. 北京:1996.
|
[17] |
US EPA. Emission factor documentation for AP-42, Appendix C.1Procedures for sampling surface/bulk dust loading[R]. Washington DC:US EPA, 1995.
|
[18] |
US EPA. Emission factor documentation for AP-42, Procedures for laboratory analysis of surface/bulk dust[R]. Washington DC:US EPA, 1995.
|
[19] |
黄玉虎,曲松,宋光武,等.扬尘源粒度组成筛分方法比较[J]. 环境科学研究, 2013,26(5):522-526.
|
[20] |
US EPA. Emission factor documentation for AP-42, Section 13.2.1:Paved roads[R]. Washington DC:US EPA, 2011.
|
[21] |
US EPA. Emission factor documentation for AP-42, Section 11.12Concrete batching[R]. Washington DC:US EPA, 1995.
|
[22] |
Cowherd C, Donaldson J, Hegarty R. Background document for revisions to fine fraction ratios used for AP-42fugitive dust emission factors[R]. Kansas City, MO:Midwest Research Institute, 2006.
|
[23] |
US EPA. Emission factor documentation for AP-42, Section 13.2.5Industrial wind erosion[R]. Washington DC:US EPA, 2006.
|
[24] |
国家环境保护局科技标准司.工业污染物产生和排放系数手册[M]. 北京:中国环境科学出版社, 1996:172-182.
|
[25] |
Wei Guo, John Pehrson. Case study to determine the silt content and silt loading of unpaved and paved roads at concrete material plants[J]. Extended Abstract, 2012-A-540-AWMA.
|
[26] |
樊守彬,张东旭,田灵娣,等.北京市交通扬尘PM2.5排放清单及空间分布特征[J]. 环境科学研究, 2016,29(1):21-22.
|
[27] |
北京市住房和城乡建设委员会. DB11/642-2009预拌混凝土生产管理规程[S]. 北京:中国标准出版社, 2009.
|
[28] |
北京市人民政府.京政办发[2014] 9号北京市2013-2017年清洁空气行动计划重点任务分解2014年工作措施[R]. 北京:2014.
|
[29] |
北京市住房和城乡建设委员会. DB11/642-2014预拌混凝土绿色生产管理规程[S]. 北京:中国标准出版社, 2014.
|
[30] |
Zhao Y, Nielsen CP, Lei Y, et al. Quantifying the uncertainties of a bottom-up emission inventory of anthropogenic atmospheric pollutants in China[J]. Atmospheric Chemistry and Physical, 2011,11(5):2295-2308.
|
[31] |
魏巍,王书肖,郝吉明.中国人为源VOC排放清单不确定性研究[J]. 环境科学, 2011,32(2):305-312.
|
|
|
|