氯对细菌与管材间交互作用及附着行为的影响

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (560 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this study, disinfectant-shaped bacterial adhesion behaviors on pipes with various materials and roughness were examined to underpin the underlying mechanisms of bacterial surface attachment in drinking water. The interaction between bacteria and rough surfaces was analyzed via XDLVO (extended-Derjaguin-Landau-Verwey-Overbeek) theory based on surface thermodynamics. The results showed that chlorine (≤ 1.0mg/L) significantly promoted bacterial adhesion on pipe surfaces (with a 4~6times increment compared to the situation with no chlorine). Besides, bacterial cells tended to colonize the plastic surfaces and increasing surface roughness can further promote surface adhesion. The XDLVO-based theoretical analysis showed that 1.0mg/L chlorine increases the acid-base and van der Waals interaction terms between bacteria and pipe surfaces, which encourages surface adhesion behaviors. Increasing surface roughness further intensifies cell-surface interactions. Compared with stainless steel pipes, polyvinyl chloride and polyethylene surfaces can elevate the interaction energy with bacterial cells, particularly at 1.0mg/L chlorine, which further contributes to bacterial surface attachment and aggregation.

Key words： drinking water disinfectant water supply pipe material surface roughness XDLVO theory

Received: 02 March 2023

PACS:

X703

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CAI Yin-nuo
	LIU Li
	CHEN Guo-wei
	ZHONG Shu-ying

Cite this article:

CAI Yin-nuo,LIU Li,CHEN Guo-wei等. Effect of chlorine on cell-surface interaction and bacterial adhesion behavior[J]. CHINA ENVIRONMENTAL SCIENCECE, 2023, 43(10): 5188-5195.

URL:

http://www.zghjkx.com.cn/EN/ OR http://www.zghjkx.com.cn/EN/Y2023/V43/I10/5188

[1]	Wingerder J and Flemming H-C. Contamination potential of drinking water distribution network biofilms[J]. Water Science and Technology 2004,49:277-286.
[2]	Aggarwal S, Gomez-Smith C K, Jeon Y, et al. Effects of chloramine and coupon material on biofilm abundance and community composition in bench-scale simulated water distribution systems and comparison with full-scale water mains[J]. Environmental Science & Technology, 2018,52(22):13077-13088.
[3]	Shen Y, Huang C H, Monroy G L, et al. Response of simulated drinking water biofilm mechanical and structural properties to long-term disinfectant exposure[J]. Environmental Science & Technology, 2016,50(4):1779-1787.
[4]	van der Kooij D, van der Wielen P W J J. Microbial growth in drinking-water supplies:problems, causes, control and research needs[M]. IWA Publishing, 2013.
[5]	Zhang X Y, Lin T, Jiang F C, et al. Impact of pipe material and chlorination on the biofilm structure and microbial communities[J]. Chemosphere, 2022,289:133218.
[6]	Liu L, Le Y, Jin J L, et al. Chlorine stress mediates microbial surface attachment in drinking water systems[J]. Applied Microbiology and Biotechnology, 2015,99(6):2861-2869.
[7]	Liu L, Hu Q Y, Le Y, et al. Chlorination-mediated EPS excretion shapes early-stage biofilm formation in drinking water systems[J]. Process Biochemistry, 2017,55:41-48.
[8]	Goraj W, Pytlak A, Kowalska B, et al. Influence of pipe material on biofilm microbial communities found in drinking water supply system[J]. Environmental Research, 2021,196:110433.
[9]	Jiang H J, Choi Y J, Ka J O. Effects of diverse water pipe materials on bacterial communities and water quality in the annular reactor[J]. Journal of Microbiology and Biotechnology, 2011,21(2):115-123.
[10]	Li W Y, Tan Q W, Zhou W, et al. Impact of substrate material and chlorine/chloramine on the composition and function of a young biofilm microbial community as revealed by high-throughput 16S rRNA sequencing[J]. Chemosphere, 2020,242:125310.
[11]	Ahmad M, Liu S, Mahmood N, et al. Effects of porous carrier size on biofilm development, microbial distribution and nitrogen removal in microaerobic bioreactors[J]. Bioresource Technology, 2017,234:360-369.
[12]	Kimkes T E P, Heinemann M. How bacteria recognise and respond to surface contact[J]. FEMS Microbiology Reviews, 2020,44(1):106-122.
[13]	Renner L D, Weibel D B. Physicochemical regulation of biofilm formation[J]. Mrs Bulletin, 2011,36(5):347-355.
[14]	Ammar Y, Swailes D, Bridgens B, et al. Influence of surface roughness on the initial formation of biofilm[J]. Surface & Coatings Technology, 2015,284:410-416.
[15]	Yuan Y, Hays M P, Hardwidge P R, et al. Surface characteristics influencing bacterial adhesion to polymeric substrates[J]. RSC Advances, 2017,7(23):14254-14261.
[16]	De-la-Pinta I, Cobos M, Ibarretxe J, et al. Effect of biomaterials hydrophobicity and roughness on biofilm development[J]. Journal of Materials Science-Materials in Medicine, 2019,30(7):11.
[17]	Boulos L, Prevost M, Barbeau B, et al. LIVE/DEAD BacLight:Application of a new rapid staining method for direct enumeration of viable and total bacteria in drinking water[J]. Journal of Microbiological Methods, 1999,37(1):77-86.
[18]	Du B, Wang S D, Chen G W, et al. Nutrient starvation intensifies chlorine disinfection-stressed biofilm formation[J]. Chemosphere, 2022,295:133827.
[19]	Ou Q, Xu Y, Li X, et al. Interactions between activated sludge extracellular polymeric substances and model carrier surfaces in WWTPs:A combination of QCM-D, AFM and XDLVO prediction[J]. Chemosphere, 2020,253:126720.
[20]	Cai L, Wu D, Xia J H, et al. Influence of physicochemical surface properties on the adhesion of bacteria onto four types of plastics[J]. Science of the Total Environment, 2019,671:1101-1107.
[21]	黄翔峰,林兰娜,彭开铭.表面自由能在环境微生物粘附研究中的应用进展[J]. 微生物学通报, 2016,43(7):1590-1597. HUANG X F, Lin L N, PENG K M. Progress on the application of surface free energy to the adhesion of environmental microorganisms. Microbiology China, 2016,43(7):1590-1597.
[22]	Brant J A, Childress A E. Assessing short-range membrane-colloid interactions using surface energetics[J]. Journal of Membrane Science, 2002,203(1):257-273.
[23]	Liu G, Verberk J, Van Dijk J C. Bacteriology of drinking water distribution systems:an integral and multidimensional review[J]. Applied Microbiology and Biotechnology, 2013,97(21):9265-9276.
[24]	Talluri S N L, Winter R M, Salem D R. Conditioning film formation and its influence on the initial adhesion and biofilm formation by a cyanobacterium on photobioreactor materials[J]. Biofouling, 2020, 36(2):1-17.
[25]	Anselme K, Davidson P, Popa A M, et al. The interaction of cells and bacteria with surfaces structured at the nanometre scale[J]. Acta Biomaterialia, 2010,6(10):3824-3846.
[26]	Shen Y, Monroy G L, Derlon N, et al. Role of biofilm roughness and hydrodynamic conditions in Legionella pneumophila adhesion to and detachment from simulated drinking water biofilms[J]. Environmental Science & Technology, 2015,49(7):4274-4282.
[27]	Ji C C, Zhou H, Deng S K, et al. Insight into the adhesion propensities of extracellular polymeric substances (EPS) on the abiotic surface using XDLVO theory[J]. Journal of Environmental Chemical Engineering, 2021,9(6):106563.
[28]	Al-Amshawee S, Yunus M Y B, Lynam J G, et al. Roughness and wettability of biofilm carriers:A systematic review[J]. Environmental Technology & Innovation, 2021,21:15.
[29]	张心悦,周克梅,刘煜,等.供水管材对管壁生物膜特性和水质稳定性的影响[J]. 中国给水排水, 2022,38(9):44-51. Zhang X Y, Zhou K M, Liu Y, et al. Effect of water supply pipe material on biofilm characteristics and water quality stability[J]. China water & wastewater, 2022,38(9):44-51.