Petroleum coke, a waste by-product of petroleum refining, brominated by chemical-mechanical bromination process, was used to remove trace Hg0 from flue gas. Specific surface area and pore size analyzer (BET), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis indicated that the inherent organic sulfur enhanced bromine chemisorption on petroleum coke surface. Four kinetic models were conducted to study the brominated petroleum coke for elemental mercury capture in a fixed bed system simulation test. The results show that the adsorption rate and mercury accumulating quantity are increasing when the temperature set at 150℃ and the inlet mercury concentration increased; The model fitting correlation coefficient of Elovich model which based on chemisorption reaches above 0.9999, indicating the mercury adsorption process of brominated petroleum coke is controlled dominantly by chemisorption.
Karatza A D, Lansia D, Musmarra C, et al. Study of mercury absorption and desorption on sulfur impregnated carbon[J]. Experimental Thermal and Fluid Science, 2000,21:150-155.
[6]
Suresh Kumar Reddy K, Al Shoaibi A, Srinivasakannan C. Elemental mercury adsorption on sulfur-impregnated porous carbon-A review[J]. Environmental Technology, 2013,35:18-26.
Bisson TM, MacLean LC, Hu Y, et al. Characterization of mercury binding onto a novel brominated biomass ash sorbent by X-ray absorption spectroscopy[J]. Environ. Sci. Technol, 2012,46:86-93.
Mountain of Petroleum Coke From Oil Sands Rises in Detroit, ENERGY & ENVIRONMENT, New York Times (May 17, 2013). http://www.nytimes.com/2013/05/18/business/energy-environment/mountain-of-petroleum-coke-from-oil-sands-rises-in-detroit.html.
[12]
Lee Y, Rhim Y J. Carbon-based novel sorbent for removing gas-phase mercury[J]. Fuel, 2006,85:219-226.
[13]
Morris EA, Jia CQ. Effects of O2 on Characteristics of Sulfur Added to Petroleum Coke through Reaction with SO2[J]. Ind. Eng. Chem. Res, 2010,49:12709-12717.
Gupta R P, Xu Z, Clark I, et al. Bromination process[P]. United States Patent No.20100126345.
[17]
Xiao Y, Pudasaineeb D, Gupta RP, et al. Bromination of petroleum coke for elemental mercury capture[J]. Journal of hazardous materials, 2017,336:232-239.
[18]
Xiao Y, Pudasaineeb D, Gupta RP, et al. Elemental mercury reaction chemistry on brominated petroleum cokes[J]. Carbon, 2017,124:89-96.
[19]
Rong Y, Liang DT, Tsen L, et al. Bench-scale experimental evaluation of carbon performance on mercury vapour adsorption[J]. Fuel, 2004,83(17/18):2401-2409.
[20]
周强.改性吸附剂喷射脱汞的实验及机理研究[D]. 南京:东南大学, 2016.
[21]
Naumkin AV, Kraut-Vass A, Gaarenstroom SW, et al. X-ray photoelectron spectroscopy database:NIST standard reference database version 4.1,[EB/OL]. http://srdata.nist.gov/xps/Default.aspx.
[22]
Camargo C L M, Resende N S D, Oliveira A G D, et al. Investigation of adsorp-tion-enhanced reaction process of mercury removal from simulated natural gas by mathematical modeling[J]. Fuel, 2014,129(4):129-137.
[23]
王欣.活性炭纤维低温吸附脱除汞的试验研究[D]. 武汉:华中科技大学, 2006.
[24]
Goswami S, Ghosh U C. Studies on adsorption behaviour of Cr (VI) onto synthetic hydrous stannic oxide[J]. Water S A, 2006, 31(4):597-602.
[25]
Reid C, Thomas K. Adsorption of gases on a carbon molecular sieve used for air separation:Linear adsorptives as probes for kinetic selectivity[J]. Langmuir, 1999,15(9):3206-3218.
Zhou Q, Duan Y F, Hong Y G, et al. Experimental and kinetic studies of gas-phase mercury adsorption by raw and bromine modified activated carbon[J]. Fuel Processing Technology, 2015,134:325-332.
[29]
Khunphonoi R, Khamdahsag P, Chiarakorn S, et al. Enhancement of elemental mercury adsorption by silver supported material[J]. Journal of Environmental Sciences, 2015,32:207-216.
