以深圳市某污水处理厂的污泥为原料，研究了污泥热解过程产生的颗粒物及其中8种重金属的分布规律.结果表明，颗粒物的生成速率分别在400~600℃和1000℃保温30min的两个区间内达到峰值.8种重金属的热挥发性由大到小依次为Cd > Zn > As > Pb > Mn > Ni > Cu > Cr，而其在颗粒物中富集能力大小顺序为Pb > As > Mn > Zn > Cd > Ni > Cr > Cu.颗粒物重金属在热解气中的体积浓度随热解过程呈上升趋势，Zn和Cd则在升温阶段（1000℃以前）达到峰值后开始降低.研究表明，污泥热解颗粒物富集的重金属超标，因而污泥热解尾气颗粒物的去除装置十分必要.
In this study, sewage sludge from a waste water treatment plant in Shenzhen was used for pyrolysis to investigate the characteristics of generated particulate matter (PM) and the change of 8heavy metals. The results showed that the PM production rate peaked twice at 400~600℃ and at the first 30minutes holding at 1000℃, respectively. The thermal volatility of the 8heavy metals was as follows:Cd > Zn > As > Pb > Mn > Ni > Cu > Cr. And the enrichment capacities of the 8heavy metals in the PM followed the order:Pb > As > Mn > Zn > Cd > Ni > Cr > Cu. The volumetric heavy metals concentration generally showed an increase trend with the pyrolysis process. However, Zn and Cd decreased after peaking at the stage of temperature rising (before 1000℃). The research suggests that the heavy metals enriched during sludge pyrolysis and the generated PM exceeds the standard value. Therefore, the exhaust PM removal device is necessary.
王经臣, 杨璐宁, Jae Hac Ko, 徐期勇. 市政污泥热解过程颗粒物中重金属分布[J]. 中国环境科学, 2018, 38(10): 3781-3787.
WANG Jing-chen, YANG Lu-ning, Jae Hac Ko, XU Qi-yong. Study on heavy metals in particulate matter of municipal sewage sludge pyrolysis. CHINA ENVIRONMENTAL SCIENCECE, 2018, 38(10): 3781-3787.
Dai Q, Jiang X, Jiang Y, et al. Formation of PAHs during the pyrolysis of dry sewage sludge[J]. Fuel, 2014,130(7):92-99.
[5]
Vicente E D, Alves C A. An overview of particulate emissions from residential biomass combustion[J]. Atmospheric Research, 2017, 199:159-185.
[6]
Dandajeh H A, Ladommatos N, Hellier P, et al. Effects of unsaturation of C2 and C3 hydrocarbons on the formation of PAHs and on the toxicity of soot particles[J]. Fuel, 2017,194:306-320.
[7]
Han H, Hu S, Syed-hassan S S A, et al. Effects of reaction conditions on the emission behaviors of arsenic, cadmium and lead during sewage sludge pyrolysis[J]. Bioresource Technology, 2017,236:138.
[8]
Dai S, Ren D, Chou C L, et al. Geochemistry of trace elements in Chinese coals:A review of abundances, genetic types, impacts on human health, and industrial utilization[J]. International Journal of Coal Geology, 2012,94(3):3-21.
Zhang H, Gao Z, Ao W, et al. Microwave-assisted pyrolysis of textile dyeing sludge using different additives[J]. Journal of Analytical & Applied Pyrolysis, 2017,127:140-149.
[12]
Zeng X, Xiao Z, Zhang G, et al. Speciation and bioavailability of heavy metals in pyrolytic biochar of swine and goat manures[J]. Journal of Analytical & Applied Pyrolysis, 2018,132:82-93.
[13]
Shao J, Yuan X, Leng L, et al. The comparison of the migration and transformation behavior of heavy metals during pyrolysis and liquefaction of municipal sewage sludge, paper mill sludge, and slaughterhouse sludge[J]. Bioresource Technology, 2015,198:16-22.
[14]
Jin J, Li Y, Zhang J, et al. Influence of pyrolysis temperature on properties and environmental safety of heavy metals in biochars derived from municipal sewage sludge[J]. Journal of Hazardous Materials, 2016,320:417-426.
Liu T, Liu Z, Zheng Q, et al. Effect of hydrothermal carbonization on migration and environmental risk of heavy metals in sewage sludge during pyrolysis[J]. Bioresour Technol, 2018,247:282-290.
[17]
GB/T 17664-1999木炭和木炭试验方法[S].
[18]
Bhaduri S, Berger B, Pochet M, et al. HCCI engine operated with unscrubbed biomass syngas[J]. Fuel Processing Technology, 2017, 157:52-58.
[19]
Mkhize N M, Danon B, Gryp P V D, et al. Condensation of the hot volatiles from waste tyre pyrolysis by quenching[J]. Journal of Analytical & Applied Pyrolysis, 2017,124:180-185.
[20]
Barneto A G, Carmona J A, Blanco J D. Kinetic models based in biomass components for the combustion and pyrolysis of sewage sludge and its compost[J]. Journal of Analytical & Applied Pyrolysis, 2009,86(1):108-114.
[21]
Fernández J M, Plaza C, Polo A, et al. Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application[J]. Waste Management, 2012,32(1):158-164.
[22]
Karayildirim T, Yanik J, Yuksel M, et al. Characterisation of products from pyrolysis of waste sludges[J]. Fuel, 2006,85(10/11):1498-1508.
[23]
Wang J, Tomita A. A Chemistry on the Volatility of Some Trace Elements during Coal Combustion and Pyrolysis[J]. Energy & Fuels, 2003,17(4):954-960.
[24]
Trinkel V, Mallow O, Thaler C, et al. Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace-A Critical Review of Literature Data and Plant Investigations[J]. Industrial & Engineering Chemistry Research, 2015,54(47):11759-11771.
[25]
Hayes T D,Theis T L. The Distribution of Heavy Metals in Anaerobic Digestion[J]. Journal, 1978,50(1):61-72.
