PDF(877 KB)
PDF(877 KB)
PDF(877 KB)
钢铁行业磁性纤维捕集非球形粉尘动力学研究
Study on the dynamic of non-spherical particles captured by magnetic fibers in steel industry
为研究非球形颗粒在磁场中被磁性纤维捕集的动力学行为，以钢铁行业炼钢过程中转炉和精炼炉中排放的转炉灰和精炼灰等两种粉尘为基础，利用形状系数计算公式得出的φ=0.21，0.78，0.81，1.00分别表示圆片形（厚度H=底面圆直径d/40），椭球形（x轴赤道半径：y轴赤道半径：z轴极半径=a：b：c=1：1：4），正方体形，球形颗粒，并对其进行研究.模拟结果表明，相同工况参数下，当形状系数接近时，捕集效率和运动轨迹与粉尘颗粒具体表现的形状特征无关.在传统单纤维捕集过程中，当入口风速v=0.1m/s，dp>2.0μm时，形状系数相差越大，捕集效率差距越大.形状系数对颗粒被捕集影响程度大小与单纤维捕集效率增减呈正相关；在磁性纤维产生的磁场中v=0.1m/s，dp>0.5μm时，形状系数相差越大，捕集效率差距越大.φ≥0.4时，捕集效率随形状系数的增加趋于稳定，形状系数对颗粒被捕集影响程度大小与单纤维捕集效率增减无关；在高梯度磁场中v=0.1m/s，dp=1.0μm时，形状系数相差越大导致捕集效率之间差距越大的规律越明显.当v=0.1m/s，0.5μm≤dp≤2.5μm时，形状系数对颗粒被捕集影响程度的大小与单纤维捕集效率增减呈正相关.
In order to study the dynamic behavior of non-spherical particles captured by magnetic fibers in the magnetic field, and based on the two kinds of dust, converter ash and refined ash, discharged from the converter and the refining furnace in the steel-making process in the iron and steel industry. The shape factor is calculated by formula, φ=0.21, 0.78, 0.81 and 1.00, respectively expressing the circular shape (thickness H=diameter of the bottom circle d/40), ellipsoid shape (radius of the equator of the x-axis:equator of the y-axis:z-axis polar radius=a:b:c=1:1:4), square shape and spherical particles. Under the same working conditions, the simulation results show that when the shape factor is close, the capture efficiency and moving track has nothing to do with the specific shape characteristics shown by dust particles. During the traditional single fiber capture process, while the inlet velocity v=0.1m/s and dp>2.0μm, the larger the difference of shape factor is, the larger the difference of capture efficiency will be. The influence of shape factor on particles captured is positively correlated with the increase or decrease of single fiber capture efficiency. In the magnetic field produced by magnetic fiber, while v=0.1m/s and dp>0.5μm, the larger the difference of shape factor is, the larger the difference of capture efficiency will be. When φ ≥ 0.4, the capture efficiency tends to be stable with the increase of shape factor, and the influence of shape factor on particles captured is not related to the increase or decrease of single fiber capture efficiency. In the high gradient magnetic field, when v=0.1m/s and dp=1.0μm, a larger difference of shape factor leads to more obvious of a rule in which the difference between capture efficiency is larger. When v=0.1m/s and 0.5μm ≤ dp ≤ 2.5μm, the influence of shape factor on particles captured is positively related to the increase or decrease of single fiber capture efficiency.
capture efficiency / high gradient magnetic field / magnetic fiber / shape factor
[1] 张雅.钢铁产业生态化设计与政策选择[J]. 中国人口.资源与环境, 2012,22(7):162. Zhang Y. Ecological design and policy choice of steel industry[J]. China's population, Resources and Environment, 2012,22(7):162.
[2] 华蕾娜,赵虎,李军,等.颗粒相壁面条件对非球形颗粒流动影响的数值模拟[J]. 化工学报, 2016,67(8):3251-3258. Hua L N, Zhao H, Li J, et al. Numerical study of effect of particle wall boundary condition on fluidization of irregular particles[J]. CIESC Journal, 2016,67(8):3251-3258.
[3] Mand M, Rosendahl L. On the motion of non-spherical particles at high Reynolds number[J]. Powder Technology, 2010,202(1-3):1-13.
[4] 顾丛汇,吕士武,李瑞,等.纤维对PM2.5过滤性能的影响[J]. 化工学报, 2014,65(6):2137-2147. Gu C H, Lv S W, Li R, et al. Influence of fiber on filtration performance for PM2.5[J]. CIESC Journal, 2014,65(6):2137-2147.
[5] 赵洪亮,付海明,雷陈磊,等.纤维截面形状对纤维捕集效率及压力损失的影响[J]. 东华大学学报(自然科学版), 2016,42(1):86-92. Zhao H L, Fu H M, Lei C L, et al. Effect of fibers' cross-sectional shape on fiber collection efficiency and pressure drop[J]. Journal of Donghua University (Nature Science), 2016,42(1):86-92.
[6] 王坤,赵海波.异形纤维捕集颗粒过程的格子Boltzman法数值模拟[J]. 中国粉体技术, 2015,21(6):1-6. Wang K, Zhao H B. Numerical simulation of particle capture process of noncircular fibers by lattice Boltzmann method[J]. China Powder Science and Technology, 2015,21(6):1-6.
[7] Bao L, Musadiq M, Kijima T, et al. Influence of fibers on the dust dislodgement efficiency of bag filters[J]. Textile Research Journal, 2014,84(7):764-771.
[8] Yang M, Li S, Yao Q. Mechanistic studies of initial deposition of fine adhesive particles on a fiber using discrete-element methods[J]. Powder Technology, 2013,248:44-53.
[9] Bang J, Yoon W. Stochastic analysis of a collection process of submicron particles on a single fiber accounting for the changes in flow field due to particle collection[J]. Journal of Mechanical Science and Technology, 2014,28(9):3719-3732.
[10] Hosseini S A, Tafreshi H V. Modeling particle-loaded single fiber efficiency and fiber drag using ANSYS-Fluent CFD code[J]. Computers and Fluids, 2012,66:157-166.
[11] 朱辉,付海明,亢燕铭.单纤维过滤阻力与惯性捕集效率数值分析[J]. 中国环境科学, 2017,37(4):1298-1306. Zhu H, Fu H M, Kang Y M. Numerical analysis of pressure drop and inertial collection efficiency of a single fiber[J]. China Environmental Science, 2017,37(4):1298-1306.
[12] Zhou Z Y, Pinson D, Zou R P, et al. Discrete particle simulation of gas fluidization of ellipsoidal particle[J]. Chemical Engineering Science, 2011,66(23):6128-6145.
[13] 由长福,祁海鹰,徐旭常.气固两相流中非球形颗粒所受曳力的数值研究[J]. 化工学报, 2003,54(2):188-191. You C F, Qi H Y, Xu X C. Numerical simulation of drag force on non-spherical particle in gas-particle two-phase flow[J]. Journal of Chemical Industry and Engineering, 2003,54(2):188-191.
[14] Yin C, Rosendahl L, KaeR S K, et al. Use of numerical modeling in design for co-firing biomass in wall-fired burners[J]. Chemical Engineering Science, 2004,59(16):3281-3292.
[15] Njobuenwu D O, Fairweather M. Effect of Shape on Inertial Particle Dynamics in a Channel Flow[J]. Flow Turbulence & Combustion, 2014,92(1/2):83-101.
[16] Tian L, Ahmadi G, Wang Z, et al. Transport and deposition of ellipsoidal fibers in low Reynolds number flows[J]. Journal of Aerosol Science, 2012,45:0-18.
[17] Zastawny M, Mallouppas G, Zhao F, et al. Derivation of drag and lift force and torque coefficients for non-spherical particles in flows[J]. International Journal of Multiphase Flow, 2012,39:227-239.
[18] 宫卫华,张永亮,冯帆,等.非均匀磁场等离子体中颗粒的复杂运动[J]. 物理学报, 2015,64(19):1-8. Gong W H, Zhang Y L, Feng F, et al. Complex motions of grains in dusty plasma with nonuniform magnetic field[J]. Acta Physica Sinica, 2015,64(19):1-8.
[19] Ke C H, Shu S, Zhang H, et al. LBM-IBM-DEM modelling of magnetic particles in a fluid[J]. Powder Technology, 2017,314:264-280.
[20] Qian F P, Huang N J, Zhu X J, et al. Numerical study of the gas-solid flow characteristic of fibrous media based on SEM using CFD-DEM[J]. Powder Technology, 2013,249:63-70.
[21] 朱红军.Fluent12流体分析及工程仿真[M]. 北京:清华大学出版社, 2011. Zhu H J. Fluid Analysis and Engineering Simulation of Fluent 12[M]. Beijing:Tsinghua University Press, 2011.
[22] Haider A, Levenspiel O. Drag coefficient and terminal velocity of spherical and nonspherical particles[J]. Powder Technology, 1989,58(1):63-70.
[23] 王发挥,王秀芳,张丹.高梯度磁场中多根磁介质捕集磁性微粒的数值模拟[J]. 金属矿山, 2010,39(2):103-106. Wang F H, Wang X F, Zhang D. Numerical simulation for multiple magnetic medium in entrapping magnetism particles in high gradient magnetic field[J]. Metal Mine, 2010,39(2):103-106.
[24] 雷陈磊.单纤维非稳态过滤的捕集效率及压降特性研究[D]. 上海:东华大学, 2015. Lei C L. Research on collection efficiency and pressure drop of a particle-loaded single fiber[D]. Shanghai:Donghua University, 2015.
[25] Davies C N. Air filtration[M]. London:Academic press, 1973.
[26] 张俪安,刁永发,庄加玮,等.高梯度磁场提升单纤维捕集PM2.5性能的机理[J]. 中国环境科学, 2019,39(7):2765-2773. Zhang L A, Diao Y F, Zhuang J W, et al. The Mechanism of high gradient magnetic field improving the performance of single fiber capture PM2.5[J]. China Environmental Science, 2019,39(7):2765-2773.
国家重点研发计划项目（2018YFC0705300）；中央高校基本科研业务费重点项目（2232017A-09）
京公网安备 11010802030352号 /
| 〈 |
|
〉 |
