PM2.5 emissions from iron and steel and nonferrous industries as object, based on the discrete particle model DPM and UDF custom programming, The effects of inlet velocity, particle diameter, external magnetic field strength, magnetic fiber magnetic flux density and magnetic susceptibility on the capture efficiency were studied and analyzed by combination between the particle motion trajectory and force. The results showed that when 0.5μm£dp£2.5μm, v=0.1m/s, the efficiency of single fiber to capture PM2.5 could be improved by using high gradient magnetic field(H=0.1T, B=0.06T)4.23times. It was also found that there were two gravitational zones and two repulsive zones around the magnetic fibers. At the same time, in the high gradient magnetic field, the capture efficiency of the magnetic fiber to PM2.5 decreased first and then stabilized with the inlet velocity; while the capture efficiency increased first and then decreased with the particle diameter of the dust. When dp=1.0μm, the increasing of capture efficiency was maximized at this time; whether it was the external magnetic field strength or the magnetic fiber magnetic flux density, the capturing efficiency of magnetic fiber to particles was a linear function of the field intensity, with the efficiency growth rate of KB>KH; with the increase of the magnetic susceptibility of the particles, the capturing of particles by magnetic fibers presented a two-stage linear growth law, and the growth rate K1>K2. When the particles passed through the high gradient magnetic field, the inlet velocity, dust particle diameter and field strength had a great influence on the motion trajectory, while the magnetic susceptibility had little effect on the motion trajectory.
张俪安, 刁永发, 庄加玮, 周发山, 沈恒根. 高梯度磁场提升单纤维捕集PM2.5性能的机理[J]. 中国环境科学, 2019, 39(7): 2765-2773.
ZHANG Li-an, DIAO Yong-fa, ZHUANG Jia-wei, ZHOU Fa-shan, SHEN Heng-gen. The mechanism of high gradient magnetic field improving the performance of single fiber capture PM2.5. CHINA ENVIRONMENTAL SCIENCECE, 2019, 39(7): 2765-2773.
Wang W, Tang D, Liu H. Research on current pollution status and pollution characteristics of PM2.5 in china[J]. Research of environmental sciences, 2000,13(1):1-4.
[2]
邢琼予,戴启立,毕晓辉,等.我国中西部典型城市PM2.5中痕量金属的时空分布特征和健康影响[J]. 中国环境科学, 2019,39(2):574-582. Xing Q Y, Dai Q L, Bi X H, et al. Temporal-spatial variation and health effects of trace metals in PM2.5 in four central-cities of China[J]. China Environmental Science, 2019,39(2):574-582.
[3]
Davies C N. Air filtration[M]. London:Academic press, 1973:237.
[4]
Endo Y, Chen D R, Pui D Y H. Effects of particle polydispersity and shape factor during dust cake loading on air filters[J]. Powder Technology, 1998,98(3):241-249.
[5]
Badel E, Delisee C, Lux J. 3D structural characterisation, deformation measurements and assessment of low-density wood fibreboard under compression:The use of X-ray microtomography[J]. Composites Science and Technology, 2008,68(7/8):1654-1663.
[6]
顾丛汇,吕士武,李瑞,等.纤维对PM2.5过滤性能的影响[J]. 化工学报, 2014,65(6):2137-2147. Gu C H, Lv S W, Li R, et al. Influence of fiber on filtration performance for PM2.5[J]. CIES Journal, 2014,65(6):2137-2148.
[7]
Shu Z Y, Qian F P, Huang X P. Numerical study on the effect of wall parameters on single fiber trapping efficiency[J]. Journal of Filtration and Separation, 2017,27(1):1-5.
[8]
杨林,付海明,李杰,等.单纤维对惯性颗粒稳态过滤捕集效率的数值模拟分析[J]. 东华大学学报(自然科学版), 2014,40(3):345-349. Yang L, Fu H M, Li J, et al. Numerical simulation analysis of stationary collection efficiency of inertial particles on single fiber surface[J]. Journal of DongHua University (Nature Science), 2014, 40(3):345-349.
[9]
Kasper G, Schollmeier S, Meyer J. Structure and density of deposits formed on filter fibers by inertial particle deposition and bounce[J]. Journal of Aerosol Science, 2010,41(12):1167-1182.
[10]
Hosseini S A, Tafreshi H V. Modeling particle-loaded single fiber efficiency and fiber drag using ANSYS-Fluent CFD code[J]. Computers and Fluids, 2012,66:157-166.
[11]
Bang J, Yoon W. Stochastic analysis of a collection process of submicron particles on a single fiber accounting for the changes in flow field due to particle collection[J]. Journal of Mechanical Science and Technology, 2014,28(9):3719-3732.
[12]
Li S Q, Marshall J S. Discrete element simulation of micro-particle deposition on a cylindrical fiber in an array[J]. Journal of Aerosol Science, 2007,38(10):1031-1046.
[13]
Yue C, Zhang Q, Zhai Z Q. Numerical simulation of the filtration process in fibrous filters using CFD-DEM method[J]. Journal of Aerosol Science, 2016,101:174-187.
[14]
熊桂龙,李水清,陈晟,等.增强PM2.5脱除的新型电除尘技术的发展[J]. 中国电机工程学报, 2015,35(9):2217-2213. Xiong G L, Li S Q, Chen M, et al. Development of advanced electrostatic precipitation technologies for reducing PM2.5 emissions from coal-fired power plants[J]. Proceedings of the CSEE, 2015, 35(9):2217-2223.
[15]
Svoboda J, Fujita T. Recent developments in magnetic methods of material separation[J]. Minerals Engineering, 2003,16(9):785-792.
[16]
Ravnik J, Hriber M. High gradient magnetic particle separation in viscous flows by 3D BEM[J]. Computational Mechanics, 2013,51(4):465-474.
[17]
Baik S K, Ha D W, Kwon J M, et al. Magnetic force on a magnetic particle within a high gradient magnetic separator[J]. Physica C Superconductivity, 2013,484(484):333-337.
[18]
Zheng X, Wang Y, Lu D. Investigation of the particle capture of elliptic cross-sectional matrix for high gradient magnetic separation[J]. Powder Technology, 2016,297:303-310.
[19]
吴胜利,张风杰,张建良,等.钢厂含锌粉尘基本物性及其成球性能研究[J]. 环境工程, 2015,33(7):90-95. Wu S L, Zhang F J, Zhang J L, et al. Basic characteristics and balling performance of Zinc-Bearing dust in steel plant[J]. Environmental Engineering, 2015,33(7):90-95.
[20]
赵长遂.燃煤可吸入颗粒物的脱除方法:中国, CN201172006[P]. 2007-11-14. Zhao C S. Method for the removal of inhalable particulate matter from coal burning:Chana, CN201172006[P]. 2007-11-14.
[21]
赵艳,周发山,刁永发,等.磁性载银滤料对燃煤烟气中Hg0的吸附性能[J]. 环境工程学报, 2017,11(12):6339-6344. Zhao Y, Zhou F S, Diao Y F, et al. Adsorption performance of magnetic silver-loaded filter material on Hg0from coal combustion flue gas[J]. Chinese Journal of Environmental Engineering, 2017, 11(12):6339-6344.
[22]
Qian F, Huang N, Zhu X, et al. Numerical study of the gas-solid flow characteristic of fibrous media based on SEM using CFD-DEM[J]. Powder Technology, 2013,249:63-70.
[23]
朱红军,林元华,谢龙汉. Fluent12流体分析及工程仿真[M]. 北京:清华大学出版社, 2011:186-188. Zhu H J, Lin Y H, Xie L H. Fluid analysis and engineering simulation of Fluent 12[M]. Beijing:Tsinghua University Press, 2011:186-188.
[24]
王发挥,王秀芳,张丹.高梯度磁场中多根磁介质捕集磁性微粒的数值模拟[J]. 金属矿山, 2010,39(2):103-106. Wang F H, Wang X F, Zhang D. Numerical simulation for multiple magnetic medium in entrapping magnetism particles in high gradient magnetic field[J]. Metal Mine, 2010,39(2):103-106.
[25]
林金贤,林棋,娄晨,等.气固两相流管道流动阻力特性数值模拟[J]. 油气储运, 2014,33(1):32-41. Lin J X, Lin Q, Lou C, et al. Numerical simulation of bow drag characteristics of gas-solid two-phase bow in pipeline[J]. Oil and Gas Storage and Transportation, 2014,33(1):32-41.
[26]
Tripathy S K, Bhoja S K, Raghu Kumar C, et al. A short review on hydraulic classification and its development in mineral industry[J]. Powder Technology, 2015,270:205-220.
[27]
朱辉,付海明,亢燕铭.单纤维过滤阻力与惯性捕集效率数值分析[J]. 中国环境科学, 2017,37(4):1298-1306. Zhu H, Fu H M, Kang Y M. Numerical analysis of pressure drop and inertial collection efficiency of a single fiber[J]. China Environmental Science, 2017,37(4):1298-1306.
[28]
雷陈磊.单纤维非稳态过滤的捕集效率及其压降特性研究[D]. 上海:东华大学, 2015. Lei C L. Research on collection efficiency and pressure drop of a particle-loaded single fiber[D]. Shanghai:DongHua University, 2015.
[29]
孙中元.磁选理论[M]. 长沙:中南大学出版社, 2007. Sun Z Y. Magnetic separation theory[M]. Changsha:Central South University Press, 2007:220-225.
