PDF(680 KB)
PDF(680 KB)
PDF(680 KB)
基于集总参数模型的室内PM2.5浓度预测
Pre-valuation of indoor PM2.5 concentration based on lumped parameter model
基于颗粒物浓度集总参数模型建立室内PM2.5预测模型，同时对模型中的关键参数穿透率、沉降率理论模型进行理论计算.以常州市某住宅建筑为例，通过动态模型对穿透率和沉降率模型进行实验验证，实验采样时间为2017年3月~2018年1月.根据实验数据计算换气次数在0.31~0.89h-1范围内PM2.5通过维护结构的穿透率为0.78~0.97，室内PM2.5沉降率为0.3~0.69h-1.本模型能较好地适用于自然通风、机械通风等不同通风工况室内颗粒物浓度预测.当室外PM2.5浓度在135~150μg/m3变化时，使用过滤效率为82%的新风系统可维持室内PM2.5浓度值在40~46μg/m3.
Experiments and theoretical analysis were conducted in a residential building in Changzhou to study particle penetration efficiency and deposition rate through establishing lumped parameter model of indoor PM2.5 concentration. Meanwhile, the accuracy of those models were tested and verified by experiments using a dynamic model, and the collection time from March 2017 to January 2018. According to the experimental data, the result of PM2.5 penetration efficiency was 0.78 to 0.97, while for deposition rate, it was 0.3 to 0.69h-1 when air exchange rate ranged from 0.31 to 0.89h-1. The models could be well applied to indoor particle prediction under different ventilation methods such as natural ventilation, mechanical ventilation, etc. The indoor PM2.5 concentration ranged from 40 to 46μg/m3 by using fresh air system with 82% filtration efficiency, while outdoor PM2.5 concentration was 135 to 150μg/m3.
PM2.5 / 沉降率 / 穿透率 / 集总参数模型 / 浓度预测
concentration prediction / deposition rate / lumped parameter model / penetration efficiency / PM2.5
[1] Morawska L, He C R, Hitchins J, et al. The relationship between indoor and outdoor airborne particles in the residential environment[J]. Atmospheric Environment, 2001,35(20):3463-3473.
[2] Cakmak S, Dales R, Kauri L M, et al. Metal composition of fine particulate air pollution and acute changes in cardio respiratory physiology[J]. Environmental Pollution, 2014,189(12):208-214.
[3] Koutrakis P, Briggs S, Leaderer B. Source apportionment of indoor aerosols in Suffolk and Onondaga counties, New York[J]. Environment Science & Technology, 1992,26(3):521-527.
[4] 郑淑睿,孔少飞,严沁,等.华北南部冬季大气亚微米颗粒物数浓度变化[J]. 中国环境科学, 2019,39(11):4511-4520. Zheng S R, Kong S F, Yan Q, et al. Number concentration of submicron particles during winter at a suburban site of the south edge of North China[J]. China Environmental Science, 2019,39(11):4511-4520.
[5] Wallace L. Correlation of personal exposure to particles with outdoor air measurements:A review of recent studies[J]. Aerosol Science & Technology, 2000,32(1):15-25.
[6] Nazaroff W W. Indoor particle dynamics[J]. Indoor Air, 2004, 14(Supp l7):175-183.
[7] 丛晓春,赵建建,景洲,等.基于动态质量平衡的室内颗粒物沉降规律研究[J]. 中国环境科学, 2018,38(4):1265-1273. Cong X C, Zhao J J, Jing Z, et al. Study on the deposition law of indoor particulate matters based on dynamic mass equlibrium[J]. China Environmental Science, 2018,38(4):1265-1273.
[8] 王亚峰,陈超,陈紫光,等.基于建筑外窗缝隙通风的室外PM2.5渗透与沉降特性评价模型[J]. 中国环境科学, 2016,36(7):1960-1966. Wang Y F, Chen C, Chen Z G, et al. The evaluation model of PM2.5penetration and deposition based on the air infiltration through the window gaps[J]. China Environmental Science, 2016,36(7):1960-1966.
[9] Bennett D H, Koutrakis P. Determining the infifiltration of outdoor particles in the indoor environment using a dynamic model[J]. Journal of Aerosol Science, 2006,37(6):766-785.
[10] Li Y G, Chen Z D. A balance-point method for assessing the effect of natural ventilation on indoor particle concentrations[J]. Atmospheric Environment, 2003,37(30):4277-4285.
[11] Lewis S. Solid particle penetration into enclosures[J]. Journal of Hazardous Materials, 1995,43(3):195-216.
[12] Liu D, Nazaroff W W. Modeling pollutant penetration across building envelopes[J]. Atmospheric Environment, 2001,35(26):4451-4462.
[13] Chen C, Zhao B, Zhou W T, et al. A methodology for predicting particle penetration factor through cracks of windows and doors for actual engineering application[J]. Building and Environment, 2012,47:339-348.
[14] Ji W J, Zhao B. Contribution of outdoor-originating particles, indoor-emitted particles and indoor secondary organic aerosol (SOA) to residential indoor PM2.5 concentration:A model-based estimation[J]. Building and Environment, 2015,90:196-205.
[15] Liu D L, Nazaroff W W. Particle penetration through building cracks[J]. Aerosol Science and Technology, 2003,37(7):565-573.
[16] Tian L W, Zhang G Q, Lin Y L, et al. Mathematical model of particle penetration through smooth/rough building envelop leakages. Building and Environment, 2009,44:1144-1149.
[17] 樊越胜,谢伟,张鑫,等.渗透通风建筑室内颗粒物的污染特征[J]. 环境工程学报, 2018,12(4):1128-1134. Fan Y S, Xie W, Zhang X, et al. Pollution characteristics of indoor particle matter at infiltration ventilation building[J]. Chinese Journal of Environmental Engineering, 2018,12(4):1128-1134.
[18] Mleczkowska A, Strojecki M, Bratasz U, et al. Particle penetration and deposition inside historical churches[J]. Building and Environment, 2016,95:291-298.
[19] Long C M, Suh H H, Catalano P J, et al. Using time- and size-resolved particulate data to quantify indoor penetration and deposition behaviour[J]. Environmental Science & Technology, 2001,35(10):2089-2099.
[20] El Hamdani S, Limam K, Abadie M O, et al. Deposition of fine particles on building internal surfaces[J]. Atmospheric Environment, 2008,42(39):8893-8901.
[21] He C, Morawska L, Gilbert D. Particle deposition rates in residential houses[J]. Atmospheric Environment, 2005,39(21):3891-3899.
[22] Wallace L A, Emmerich S J, Howard-Reed C. Source strengths of ultrafine and fine particles due to cooking with a gas stove[J]. Environmental Science & Technology, 2004,38(8):2304-2311.
[23] Thatcher T L, Layton D W. Deposition, re-suspension and penetration of particles within a residence[J]. Atmospheric Environment, 1995, 29(13):1487-1497.
[24] Ashrae. Ashrae Handbook[M]. Chapter 26Ventilation and infiltration. Atlanta GA:Ashrae, 2015.
[25] Hahn I, Brixey L A, Wiener R W, et al. Parameterization of meteorological variables in the process of infiltration of outdoor ultrafine particles into a residential building[J]. Journal of Environmental Monitoring, 2009,11(12):2192.
[26] Bouilly J, Limam K, Beghein C, et al. Effect of ventilation strategies on particle decay rates indoors:An experimental and modelling study[J]. Atmospheric Environment, 2005,39(27):4885-4892.
[27] Xu M D, Nematollahi M, Sextro R G, et al. Deposition of tobacco-smoke particles in a low ventilation room[J]. Aerosol Science and Technology, 1994,20(2):194-206.
[28] Rim D, Persily A, Emmerich S, et al. Multi-zone modeling of size-resolved outdoor ultrafine particle entry into a test house[J]. Atmospheric Environment, 2013,69(3):219-230.
[29] Wallace L. Indoor particles:A review[J]. Journal of Air and Waste Management Association, 1996,46(2):98-126.
[30] 张铭健,曹国庆,冯昕.室内微生物污染水平预测关键技术研究综述[J]. 中国环境科学, 2018,38(11):4040-4049. Zhang M J, Cao G Q, Feng X. Review of key technologies for forecast of indoor microbial contamination levels[J]. China Environmental Science, 2018,38(11):4040-4049.
[31] 林官明,任阵海,宋建立.室内颗粒物的稳态置换流净化机制[J]. 中国环境科学, 2018,38(1):97-102. Lin G M, Ren Z H, Song J L. The mechanism of low-speed steady substitution flow to clean the indoor particulate matter[J]. China Environmental Science, 2018,38(1):97-102.
国家重点研发计划项目（2016YFC0700500）
京公网安备 11010802030352号 /
| 〈 |
|
〉 |
