焊接工艺多源散发的高温颗粒污染物扩散特性数值模拟

韩坤; 庄加玮; 刁永发; 任美; 张俪安

PDF(3129 KB)

中国环境科学 ›› 2022, Vol. 42 ›› Issue (6) : 2552-2560.

大气污染与控制

焊接工艺多源散发的高温颗粒污染物扩散特性数值模拟

韩坤¹, 庄加玮^1,2, 刁永发¹, 任美¹, 张俪安¹

作者信息 +

Numerical simulation of diffusion characteristics of high-temperature particles generated by multiple pollution sources in welding process

HAN Kun¹, ZHUANG Jia-wei^1,2, DIAO Yong-fa¹, REN Mei¹, ZHANG Li-an¹

Author information +

文章历史 +

摘要

为探究热工艺过程产生的热气流作用下颗粒的迁移规律,基于气固两相离散粒子模型(DPM)对多源浮射流伴生的高温颗粒的扩散特性进行了数值研究,讨论了两相流运动过程中热气流与颗粒群的温度和速度的瞬时变化情况.结果表明,对于473K£T₀£673K的高温颗粒群,温度衰减趋势类似,颗粒群温度分布呈中心对称;当5μm£d_p£20μm时,颗粒与气流之间的跟随性随着粒径的增大而降低;热羽流随时间经历了独立发展和相互合并的过程,羽流之间涡旋结构的消失导致中心位污染源散发的d_p=10μm的颗粒更容易发生沉降.

Abstract

In order to explore the migration law of particles under the action of hot airflow in the process of hot working, the diffusion characteristics of high-temperature particles associated with multiple buoyant jets are numerically studied based on the gas-solid two-phase discrete particle model (DPM). The instantaneous changes of the temperature and velocity of the hot airflow and the particle group during the two-phase flow are discussed. The results show that for the high-temperature particle group with 473K£T₀£673K, the temperature attenuation trend is similar, and the temperature distribution of the particle group is centrosymmetric. When the particle size is between 5μm and 20μm, the followability between particles and airflow decreases as the particle size increases.Thermal plumes have undergone independent development and merging processes over time.The disappearance of the vortex structure between the plumes causes the particles with a particle size of 10mm emitted by the central pollution source to settle moreeasily.

导出引用

韩坤, 庄加玮, 刁永发, 任美, 张俪安. 焊接工艺多源散发的高温颗粒污染物扩散特性数值模拟[J]. 中国环境科学. 2022, 42(6): 2552-2560

HAN Kun, ZHUANG Jia-wei, DIAO Yong-fa, REN Mei, ZHANG Li-an. Numerical simulation of diffusion characteristics of high-temperature particles generated by multiple pollution sources in welding process[J]. China Environmental Science. 2022, 42(6): 2552-2560

中图分类号： X513

参考文献

[1] Huang Y, Wang Y, Ren X, et al. Ventilation guidelines for controlling smoke, dust, droplets and waste heat:Four representative case studies in Chinese industrial buildings[J]. Energy and Buildings, 2016,128:834-844.
[2] 魏梦举,崔海航,张鸿雁,等.铁水倾倒过程的热羽流流场特性研究[J].热加工工艺, 2017,(17):114-118.Wei M J, Cui H H, Zhang H Y, et al. Study on flow field of thermal plume during pouring process of molten iron[J]. Hot Working Technology, 2017,(17):114-118.
[3] 庄加玮,刁永发,楚明浩,等.可吸入颗粒物在不同阻塞性呼吸道内运动与沉积特性[J].中国环境科学, 2021,41(7):3349-3359.Zhuang J W, Diao Y F, Chu M H, et al. Transport and deposition characteristics of inhalable particulate matters in different obstructive airways[J]. China Environmental Science, 2021,41(7):3349-3359.
[4] Sharma M, Kataria K K, Suri N M, et al. Monitoring respirable dust exposure in fettling work environment of a foundry:A proposed design intervention[J]. Int. J. Saf. Secur. Eng, 2020,10:759-767.
[5] Rahul M, Sivapirakasam S P, Vishnu B R, et al. Health issue owing to exposure with welding fumes and their control strategies at the source-A review[J]. Materials Today:Proceedings, 2021,46:9239-9245.
[6] Szczurek A, Maciejewska M, Wyłomańska A, et al. Normal and anomalous diffusion in fluctuations of dust concentration nearby emission source[J]. Physica A:Statistical Mechanics and its Applications, 2018,491:619-631.
[7] Wang H, Wang T, Liu L, et al. Numerical evaluation of the performances of the ventilation system in a blast furnace casthouse[J]. Environmental Science and Pollution Research, 2021:1-15.
[8] Bémer D, Régnier R, Subra I, et al. Ultrafine particles emitted by flame and electric arc guns for thermal spraying of metals[J]. Annals of occupational hygiene, 2010,54(6):607-614.
[9] Wang Y, Zhao T, Cao Z, et al. The influence of indoor thermal conditions on ventilation flow and pollutant dispersion in downstream industrial workshop[J]. Building and Environment, 2021,187:107400.
[10] Zhiyuan W, Bo L, Fali H, et al. Numerical simulation of smoke particle motion[C]//2017 International Conference on Advanced Mechatronic Systems (ICAMechS). IEEE, 2017:131-134.
[11] Wang Y, Duan M, Ren X, et al. Experimental study of dust emission:Comparison between high-temperature and ambient-temperature materials[J]. Powder Technology, 2016,301:1321-1329.
[12] Li C, Wang H, Yu C W, et al. Diffusion characteristics of the industrial submicron particle under Brownian motion and turbulent diffusion[J]. Indoor and Built Environment, 2021:1420326X21991055.
[13] Zhuang J, Diao Y, Shen H. Numerical investigation on transport characteristics of high-temperature fine particles generated in a transiently welding process[J]. International Journal of Heat and Mass Transfer, 2021,176:121471.
[14] Ichimiya K, Saiki H. Behavior of thermal plumes from two-heat sources in an enclosure[J]. International Journal of Heat and Mass Transfer, 2005,48(16):3461-3468.
[15] Tokuhiro A, Kimura N. An experimental investigation on thermal striping:Mixing phenomena of a vertical non-buoyant jet with two adjacent buoyant jets as measured by ultrasound Doppler velocimetry[J]. Nuclear Engineering and Design, 1999,188(1):49-73.
[16] Yannopoulos P C, Noutsopoulos G C. Interaction of vertical round turbulent buoyant jets-Part II:Superposition method[J]. Journal of Hydraulic Research, 2006,44(2):233-248.
[17] Lai A C H, Lee J H W. Dynamic interaction of multiple buoyant jets[J]. Journal of fluid mechanics, 2012,708:539-575.
[18] Yang C, Li A, Gao X, et al. Interaction of the thermal plumes generated from two heat sources of equal strength in a naturally ventilated space[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2020,198:104085.
[19] Huang Y, Lu K, Guo J, et al. Study on ventilation performance of lateral exhaust hood under the influence of two high-temperature buoyant jets[J]. Building and Environment, 2020,177:106849.
[20] Shaheed R, Mohammadian A, Gildeh H K. A comparison of standard k-ε and realizable k-ε turbulence models in curved and confluent channels[J]. Environmental Fluid Mechanics, 2019,19(2):543-568.
[21] Lateb M, Masson C, Stathopoulos T, et al. Comparison of various types of k-ε models for pollutant emissions around a two-building configuration[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2013,115:9-21.
[22] Zhong K, Yang X, Kang Y. Effects of ventilation strategies and source locations on indoor particle deposition[J]. Building and environment, 2010,45(3):655-662.
[23] Limam K, El Hamdani S, Abadie M, et al. Numerical study of transport and particle deposition inside buildings[J]. Energy Procedia, 2017,139:430-436.
[24] Karadimou D P, Markatos N C. Modelling of two-phase, transient airflow and particles distribution in the indoor environment by Large Eddy Simulation[J]. Journal of Turbulence, 2016,17(2):216-236.
[25] Ireland P J, Desjardins O. Improving particle drag predictions in Euler-Lagrange simulations with two-way coupling[J]. Journal of Computational Physics, 2017,338:405-430.
[26] Yang Y, Wang Y, Song B, et al. Transport and control of droplets:A comparison between two types of local ventilation airflows[J]. Powder Technology, 2019,345:247-259.
[27] Huang Y, Wang W, Lu K, et al. Flow-field evolution and vortex structure characteristics of a high-temperature buoyant jet[J]. Building and Environment, 2021,187:107407.
[28] Duan M, Wang Y, Gao D, et al. Modeling dispersion mode of high-temperature particles transiently produced from industrial processes[J]. Building and Environment, 2017,126:457-470.
[29] Freire A P S, Miranda D D E, Luz L M S, et al. Bubble plumes and the Coanda effect[J]. International journal of multiphase flow, 2002, 28(8):1293-1310.