Abstract:In this work, resin-based solid amine adsorbents were obtained by effectively functionalizing polyethyleneimine (PEI) into porous resin (HP20) using a simple wet impregnation method. The effects of PEI loading (30%~60%), adsorption temperature (30~90℃) and pressure (2~100kPa) on the CO2 adsorption performance of the adsorbents were investigated. It was shown that the optimum PEI loading for the adsorbents was 50%, and that excess PEI resulted in a significant decrease in CO2 adsorption capacity and amine utilization efficiency. The screened adsorbents exhibited excellent CO2 adsorption performance at both low and high CO2 partial pressures, with CO2 adsorption capacities ranging from 3.06 to 3.78mmol/g at 30℃, indicating that resin-based solid amine adsorbents were suitable for different CO2 capture applications at various CO2 partial pressures. In addition, the CO2/CH4 and CO2/N2 selectivity of resin-based solid amine adsorbents ranged from 262 to 5858 and from 708 to 11551 at 2~100kPa, respectively, which were at a high level among various traditional and emerging solid adsorbents.
王 灿,张亚欣.碳中和愿景的实现路径与政策体系 [J]. 中国环境管理, 2020,12(6):58-64. Wang C, Zhang Y X. Implementation pathway and policy system of carbon neutrality vision [J]. Chinese Journal of Environmental Management, 2020,12(6):58-64.
[2]
Bui M, Adjiman C S, Bardow A, et al. Carbon capture and storage (CCS): the way forward [J]. Energy & Environmental Science, 2018, 11:1062-1176.
[3]
Chao C, Deng Y M, Dewil R, et al. Post-combustion carbon capture [J]. Renewable and Sustainable Energy Reviews, 2021,138:110490.
[4]
Singh G, Lee J, Kakakoti A, et al. Emerging trends in porous materials for CO2 capture and conversion [J]. Chemical Society Reviews, 2020, 49:4360-4404.
[5]
Yamada H. Amine-based capture of CO2 for utilization and storage [J]. Polymer Journal, 2021,53:93-102.
[6]
Min K, Choi W, Kim C, et al. Oxidation-stable amine-containing adsorbents for carbon dioxide capture [J]. Nature Communication, 2018,9:726-732.
[7]
Shen X, Yan F, Li C, et al. Biogas upgrading via cyclic CO2 adsorption: Application of highly regenerable PEI@nano-Al2O3 adsorbents with anti-urea properties [J]. Environmental Science & Technology, 2021, 55:5236-5247.
[8]
Panda D, Kumar E A, Singh S K. Amine modification of binder-containing zeolite 4A bodies for post-combustion CO2 capture [J]. Industrial & Engineering Chemistry Research, 2019,58:5301- 5313.
[9]
Rattanaphan S, Rungrotmongkol T, Kongsune P. Biogas improving by adsorption of CO2 on modified waste tea activated carbon [J]. Renewable Energy, 2020,145:622-631.
[10]
Kwon H T, Sakwa-Novak M A, Pang S H, et al. Aminopolymer- impregnated hierarchical silica structures: Unexpected equivalent CO2 uptake under simulated air capture and flue gas capture conditions [J]. Chemistry of Materials, 2019,31(14):5229-5237.
[11]
任 杰,刘凤玲,邱 慧,等.模板剂十二胺对胺改性HMS吸附CO2的影响 [J]. 中国环境科学, 2018,38(4):1274-1279. Ren J, Liu F L, Qiu H, et al. The influences of template dodecylamine on CO2 adsorption to Amine-modified HMS [J]. China Environmental Science, 2018,38(4):1274-1279.
[12]
Karka S, Kodukula S, Nandury S V, et al. Polyethylenimine-modified zeolite 13X for CO2 capture: Adsorption and kinetic studies [J]. ACS Omega, 2019,4:16441-16449.
[13]
Meng Y, Jiang J, Gao Y, et al. Biogas upgrading to methane: Application of a regenerable polyethyleneimine-impregnated polymeric resin (NKA-9) via CO2 sorption [J]. Chemical Engineering Journal, 2019,361:294-303.
[14]
Meng Y, Ju T, Meng F, et al. Insights into the critical role of abundant-porosity supports in polyethylenimine functionalization as efficient and stable CO2 adsorbents [J]. ACS Applied Materials & Interfaces, 2021,13:54018-54031.
[15]
Sigeglman R L, Kim E J, Long J R. Porous materials for carbon dioxide separation [J]. Nature Materials, 2021,20:1060-1072.
[16]
Qyyum M A, Haider J, Qadeer K, et al. Biogas to liquefied biomethane: Assessment of 3P’s-Production, processing, and prospects [J]. Renewable and Sustainable Energy Reviews, 2020,119: 109561.
[17]
Wang W, Liu F, Zhang Q, et al. Efficient removal of CO2 from indoor air using a polyethyleneimine-impregnated resin and its low- temperature regeneration [J]. Chemical Engineering Journal, 2020, 399:125734.
[18]
Bai G, Han Y, Du P, et al. Polyethylenimine (PEI)-impregnated resin adsorbent with high efficiency and capacity for CO2 capture from flue gas [J]. New Journal of Chemistry, 2019,43:18345-18354.
[19]
Wang J, Ke C, Jia X, et al. Polyethyleneimine-functionalized mesoporous carbon nanosheets as metal-free catalysts for the selective oxidation of H2S at room temperature [J]. Applied Catalysis B: Environmental, 2021,283:119650.
[20]
Yoo C J, Narayanan P, Jones C W. Self-supported branched poly(ethyleneimine) materials for CO2 adsorption from simulated flue gas [J]. Journal of Materials Chemistry A, 2019,7:19513-19521.
[21]
Patel H A, Byun J, Yavuz C T. Carbon dioxide capture adsorbents: Chemistry and Methods [J]. ChemSusChem, 2017,10,1303-1317.
[22]
Liu F, Wang L, Huang Z, et al. Amine-tethered adsorbents based on three-dimensional macroporous silica for CO2 capture from simulated flue gas and air [J]. ACS Applied Materials & Interfaces, 2014,6: 4371-4381.
[23]
Lou F, Zhang A, Zhang G, et al. Enhanced kinetics for CO2 sorption in amine-functionalized mesoporous silica nanosphere with inverted cone-shaped pore structure [J]. Applied Energy, 2020,264:114637.
[24]
Jahandar L M, Ziaei-Azad H, Sayari A. Insights into the hydrothermal stability of triamine-functionalized SBA-15silica for CO2 adsorption [J]. ChemSusChem, 2017,10:4037-4045.
[25]
Keller L, Ohs B, Lenhart J, et al. High capacity polyethylenimine impregnated microtubes made of carbon nanotubes for CO2 capture [J]. Carbon, 2018,126:338-345.
[26]
欧阳少波,徐绍平,张俊杰,等.N2/CH4在吸附剂上的动态吸附特性 [J]. 化工进展, 2014,33(10):2546-2551. Ouyang S B, Xu S P, Zhang J J, et al. Study on N2/CH4 adsorption property in the adsorbents [J]. Chemical Industry and Engineering Progress, 2014,33(10):2546-2551.
[27]
Wang S, Li Y, Dai S, et al. Prediction by convolutional neural networks of CO2/N2 selectivity in porous carbons from N2 adsorption isotherm at 77K [J]. Angewandte Chemie-International Edition, 2020, 132:19813-19816.
[28]
Wadi B, Golmakani A, Manovic V, et al. Effect of combined primary and secondary amine loadings on the adsorption mechanism of CO2/ CH4 in biogas [J]. Chemical Engineering Journal, 2021,420:130294.
[29]
Shin S, Yoo D K, Bae Y S, et al. Polyvinylamine-loaded metal– organic framework MIL-101for effective and selective CO2 adsorption under atmospheric or lower pressure [J]. Chemical Engineering Journal, 2020,389:123429.
[30]
Manyà J J, González B, Azuara M, et al. Ultra-microporous adsorbents prepared from vine shoots-derived biochar with high CO2 uptake and CO2/N2 selectivity [J]. Chemical Engineering Journal, 2018,345:631-639.
[31]
Prats H, Bahamon D, Alonso G, et al. Optimal Faujasite structures for post combustion CO2 capture and separation in different swing adsorption processes [J]. Journal of CO2 Utilization, 2017,19:100-111.
[32]
Remy T, Gobechiya E, Danaci D, et al. Biogas upgrading through kinetic separation of carbon dioxide and methane over Rb- and Cs-ZK-5zeolites [J]. RSC Advances, 2014,4:62511-62524.
[33]
Chen Y, Wu H, Lv D, et al. An ultramicroporous nickel-based metal−organic framework for adsorption separation of CO2 over N2 or CH4 [J]. Energy & Fuels, 2018,32:8676-8682.
[34]
庞米杰,陈钰文,王婉慈,等.石墨烯量子点辅助合成Cu-MOFs及CO2吸附行为 [J]. 中国环境科学, 2021,41(10):4565-4571. Pang M J, Chen Y W, Wang W C, et al. Synthesis and CO2 adsorptive storage of Cu-MOFs by graphene quantum dots-assistant route [J]. China Environmental Science, 2021,41(10):4565-4571.
[35]
Wang Y, Yang R T. Chemical liquid deposition modified 4A zeolite as a size-selective adsorbent for methane upgrading, CO2 capture and air separation [J]. ACS Sustainable Chemistry & Engineering, 2019,7: 3301-3308.
[36]
Rafigh S M, Heydarinasab A. Mesoporous chitosan–SiO2 nanoparticles: Synthesis, characterization, and CO2 adsorption capacity [J]. ACS Sustainable Chemistry & Engineering, 2017,5: 10379-10386.
[37]
Shen Y, Li Z, Wang L, et al. Cobalt–citrate framework armored with graphene oxide exhibiting improved thermal stability and selectivity for biogas decarburization [J]. Journal of Materials Chemistry A, 2015,3:593-599.