Numerical simulation of diffusion characteristics of high-temperature particles generated by multiple pollution sources in welding process
HAN Kun1, ZHUANG Jia-wei1,2, DIAO Yong-fa1, REN Mei1, ZHANG Li-an1
1. College of Environmental Science and Engineering, Donghua University, Shanghai 201620, China; 2. College of Petroleum Engineering, Changzhou University, Changzhou 213164, China
Abstract:In order to explore the migration law of particles under the action of hot airflow in the process of hot working, the diffusion characteristics of high-temperature particles associated with multiple buoyant jets are numerically studied based on the gas-solid two-phase discrete particle model (DPM). The instantaneous changes of the temperature and velocity of the hot airflow and the particle group during the two-phase flow are discussed. The results show that for the high-temperature particle group with 473K£T0£673K, the temperature attenuation trend is similar, and the temperature distribution of the particle group is centrosymmetric. When the particle size is between 5μm and 20μm, the followability between particles and airflow decreases as the particle size increases.Thermal plumes have undergone independent development and merging processes over time.The disappearance of the vortex structure between the plumes causes the particles with a particle size of 10mm emitted by the central pollution source to settle moreeasily.
Huang Y, Wang Y, Ren X, et al. Ventilation guidelines for controlling smoke, dust, droplets and waste heat:Four representative case studies in Chinese industrial buildings[J]. Energy and Buildings, 2016,128:834-844.
[2]
魏梦举,崔海航,张鸿雁,等.铁水倾倒过程的热羽流流场特性研究[J].热加工工艺, 2017,(17):114-118.Wei M J, Cui H H, Zhang H Y, et al. Study on flow field of thermal plume during pouring process of molten iron[J]. Hot Working Technology, 2017,(17):114-118.
[3]
庄加玮,刁永发,楚明浩,等.可吸入颗粒物在不同阻塞性呼吸道内运动与沉积特性[J].中国环境科学, 2021,41(7):3349-3359.Zhuang J W, Diao Y F, Chu M H, et al. Transport and deposition characteristics of inhalable particulate matters in different obstructive airways[J]. China Environmental Science, 2021,41(7):3349-3359.
[4]
Sharma M, Kataria K K, Suri N M, et al. Monitoring respirable dust exposure in fettling work environment of a foundry:A proposed design intervention[J]. Int. J. Saf. Secur. Eng, 2020,10:759-767.
[5]
Rahul M, Sivapirakasam S P, Vishnu B R, et al. Health issue owing to exposure with welding fumes and their control strategies at the source-A review[J]. Materials Today:Proceedings, 2021,46:9239-9245.
[6]
Szczurek A, Maciejewska M, Wyłomańska A, et al. Normal and anomalous diffusion in fluctuations of dust concentration nearby emission source[J]. Physica A:Statistical Mechanics and its Applications, 2018,491:619-631.
[7]
Wang H, Wang T, Liu L, et al. Numerical evaluation of the performances of the ventilation system in a blast furnace casthouse[J]. Environmental Science and Pollution Research, 2021:1-15.
[8]
Bémer D, Régnier R, Subra I, et al. Ultrafine particles emitted by flame and electric arc guns for thermal spraying of metals[J]. Annals of occupational hygiene, 2010,54(6):607-614.
[9]
Wang Y, Zhao T, Cao Z, et al. The influence of indoor thermal conditions on ventilation flow and pollutant dispersion in downstream industrial workshop[J]. Building and Environment, 2021,187:107400.
[10]
Zhiyuan W, Bo L, Fali H, et al. Numerical simulation of smoke particle motion[C]//2017 International Conference on Advanced Mechatronic Systems (ICAMechS). IEEE, 2017:131-134.
[11]
Wang Y, Duan M, Ren X, et al. Experimental study of dust emission:Comparison between high-temperature and ambient-temperature materials[J]. Powder Technology, 2016,301:1321-1329.
[12]
Li C, Wang H, Yu C W, et al. Diffusion characteristics of the industrial submicron particle under Brownian motion and turbulent diffusion[J]. Indoor and Built Environment, 2021:1420326X21991055.
[13]
Zhuang J, Diao Y, Shen H. Numerical investigation on transport characteristics of high-temperature fine particles generated in a transiently welding process[J]. International Journal of Heat and Mass Transfer, 2021,176:121471.
[14]
Ichimiya K, Saiki H. Behavior of thermal plumes from two-heat sources in an enclosure[J]. International Journal of Heat and Mass Transfer, 2005,48(16):3461-3468.
[15]
Tokuhiro A, Kimura N. An experimental investigation on thermal striping:Mixing phenomena of a vertical non-buoyant jet with two adjacent buoyant jets as measured by ultrasound Doppler velocimetry[J]. Nuclear Engineering and Design, 1999,188(1):49-73.
[16]
Yannopoulos P C, Noutsopoulos G C. Interaction of vertical round turbulent buoyant jets-Part II:Superposition method[J]. Journal of Hydraulic Research, 2006,44(2):233-248.
[17]
Lai A C H, Lee J H W. Dynamic interaction of multiple buoyant jets[J]. Journal of fluid mechanics, 2012,708:539-575.
[18]
Yang C, Li A, Gao X, et al. Interaction of the thermal plumes generated from two heat sources of equal strength in a naturally ventilated space[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2020,198:104085.
[19]
Huang Y, Lu K, Guo J, et al. Study on ventilation performance of lateral exhaust hood under the influence of two high-temperature buoyant jets[J]. Building and Environment, 2020,177:106849.
[20]
Shaheed R, Mohammadian A, Gildeh H K. A comparison of standard k-ε and realizable k-ε turbulence models in curved and confluent channels[J]. Environmental Fluid Mechanics, 2019,19(2):543-568.
[21]
Lateb M, Masson C, Stathopoulos T, et al. Comparison of various types of k-ε models for pollutant emissions around a two-building configuration[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2013,115:9-21.
[22]
Zhong K, Yang X, Kang Y. Effects of ventilation strategies and source locations on indoor particle deposition[J]. Building and environment, 2010,45(3):655-662.
[23]
Limam K, El Hamdani S, Abadie M, et al. Numerical study of transport and particle deposition inside buildings[J]. Energy Procedia, 2017,139:430-436.
[24]
Karadimou D P, Markatos N C. Modelling of two-phase, transient airflow and particles distribution in the indoor environment by Large Eddy Simulation[J]. Journal of Turbulence, 2016,17(2):216-236.
[25]
Ireland P J, Desjardins O. Improving particle drag predictions in Euler-Lagrange simulations with two-way coupling[J]. Journal of Computational Physics, 2017,338:405-430.
[26]
Yang Y, Wang Y, Song B, et al. Transport and control of droplets:A comparison between two types of local ventilation airflows[J]. Powder Technology, 2019,345:247-259.
[27]
Huang Y, Wang W, Lu K, et al. Flow-field evolution and vortex structure characteristics of a high-temperature buoyant jet[J]. Building and Environment, 2021,187:107407.
[28]
Duan M, Wang Y, Gao D, et al. Modeling dispersion mode of high-temperature particles transiently produced from industrial processes[J]. Building and Environment, 2017,126:457-470.
[29]
Freire A P S, Miranda D D E, Luz L M S, et al. Bubble plumes and the Coanda effect[J]. International journal of multiphase flow, 2002, 28(8):1293-1310.