1. School of Energy and Environment, Anhui University of Technology, Anhui Ma'anshan, China 243000; 2. School of Energy and Environment, University of Science and Technology Beijing, China 100083, China
Abstract:Towards both the problem of poor ash cleaning effect of coated membrane filter material commonly used in metal mine dust treatment and the basic requirements of ultra-low emission of ultra-fine dust, PTFE filter media immersion melt modification method was developed to prepare the melt-jet-punched fiber microporous membranes with a wide range of adaptability and low resistance and efficiency. PTFE melt-punched fiber microporous membrane production process was combined with the FE-SEM fiber structure recombination CFD-DEM coupling numerical simulation technology method, via which the filtration characteristics and dust removal surface characteristics of the microporous membrane filter material were analyzed. The results show that the fiber microporous membrane filter material made by pressure impregnation dyeing and heating baking treatment could provide the fine sericillary structure on the PTFE spray wire skeleton, which increased both the filling rate of the filter material (SVF) and the filtration efficiency of ultra-fine dust, especially for the third group of filter materials, the dust removal efficiency of fine particulate matter below PM10 was increased from 95.5% to 99.3%. We further verified the physical properties of the filter media by numerical simulation, and analyzed the microscopic dust removal performance and dust adhesion state distribution of the new filter media by combining FE-SEM microscopic dust adhesion state distribution.
Chen Yihua. Discussion on Micro Dust Control Technology in Metal Mine[C]//China Mining Technology Wenhui——2014.2014.
[2]
吴绍咏.金属非金属矿山安全生产的主要影响因素及管理对策分析[J]. 中国金属通报, 2022,(8):186-188. Wu Shaoyong. Analysis of the main influencing factors and management countermeasures of safety production in metal and non-metal mines[J]. China Metal Bulletin, 2022,(8):186-188.
[3]
朱荣成..减少金属矿山井下开采粉尘危害的措施[J]. 世界有色金属, 2018,(3):66-67. Zhu Rongcheng. Measures to reduce dust hazards from underground mining in metal mines[J]. World non-ferrous Metals, 2018,(3):66-67.
[4]
蒋仲安;曾发镔;王亚朋.我国金属矿山采运过程典型作业场所粉尘污染控制研究现状与展望[J]. 金属矿山, 2021,(1):135-153. Jiang Zhongan; Zeng Bin; Wang Yapeng. Research status and prospect of dust pollution control in typical workplaces of metal mines in China[J]. Metal Mines, 2021,(1):135-153.
[5]
王继刚.井下粉尘的检测及危害控制分析[J]. 山西冶金, 2022, (1):045. Wang Jigang. Detection and hazard control analysis of underground dust[J]. Shanxi Metallurgy, 2022,(1):045.
[6]
杨飞.论露天矿开采过程中的粉尘污染控制问题[J]. 华夏地理, 2016,(4):81. Yang Fei. On dust pollution control in open pit mining[J]. Huaxia Geography, 2016,(4):81.
[7]
胡兴华.减少金属矿山井下开采粉尘危害的措施研究[J]. 世界有色金属, 2019,(21):2. Hu Xinghua. Study on the measures to reduce the harm of underground dust mining in metal mines[J]. World Nonferrous Metals, 2019,(21):2.
[8]
蔡高现.非金属矿山安全生产的主要影响因素及管理对策分析[J]. 内蒙古煤炭经济, 2020,(14):2. Cai G X. Analysis of the main influencing factors and management countermeasures of safety production in non-metallic mines[J]. Inner Mongolia Coal Economy, 2020,(14):2.
[9]
宁琳,郑毅.浅析袋式除尘器应用中的问题[J]. 建筑工程技术与设计, 2018,(9):603. Ning Lin, Zheng Yi. On the problems in the application of bag dust collector[J]. Construction Engineering Technology and Design, 2018,(9):603.
[10]
贺建华.湿式静电除尘技术的发展及应用探讨[J]. 低碳世界, 2020,10(7):30-32. He Jianhua, Mr. Discussion on the development and application of wet electrostatic dust removal technology[J]. Low-Carbon World, 2020, 10(7):30-32.
[11]
陈春侠.袋式除尘器用滤料的除尘效果分析[J]. 上海纺织科技, 2013,41(4):57-59. Chen Chunxia. Analysis of dust removal effect of filter material for bag dust collector[J]. Shanghai Textile Technology, 2013,41(4):57-59.
[12]
张保利,王丽香,郭智敏,等.袋式除尘滤料的特殊处理和选择[J]. 北方环境, 2012,24(5):113-116. Zhang Paoli, Wang Lixiang, Guo Zhimin, et al. Special treatment and selection of bag dust removal filter material[J]. Northern Environment, 2012,24(5):113-116.
[13]
张延民,王伟,侯春生,等.袋式除尘新技术的研究与应用[J]. 中国环保产业, 2006,(3):10-13. Zhang Yanmin, Wang Wei, Hou Chunsheng, et al. Research and application of the new technology of bag dust removal[J]. Environmental protection industry in China, 2006,(3):10-13.
[14]
柳静献,张舒,吕超,等.PPS/PTFE/PbTiO3复合纤维滤料制备及过滤特性研究[J]. 安全与环境学报, 2023,(2):514-520. Liu Jingxian, Zhang Shu, Lu Chao, et al. Study on PPS/PTFE/PbTiO3 Composite fiber filter material[J]. Journal of Safety and Environment, 2023,(2):514-520.
[15]
丁志敏,王岩,陈宜华,等.PTFE无纤维微孔膜除尘性能试验研究及其应用[J]. 工业安全与环保, 2021,47(11):88-91. Ding Zhimin, Wang Yan, Chen Yihua, et al. Experimental study on dust removal performance of PTFE and its application[J]. Industrial safety and environmental Protection, 2021,47(11):88-91.
[16]
邓洪.浸渍整理芳纶/PAN预氧化纤维滤料性能[J]. 纺织科技进展, 2021,(4):15-17,22. Deng Hong. Performance of aramid/PAN pre-oxidation fiber[J]. Progress in Textile Technology, 2021,(4):15-17,22.
[17]
朱辉,杨会,付海明,等.椭圆纤维过滤压降与惯性捕集效率数值分析[J]. 中国环境科学, 2019,39(2):565-573. Zhu Hui, Yang Hui, Fu Haiming, et al. Numerical analysis of filter pressure drop and inertial capture efficiency of elliptical fibers[J]. China Environmental Science, 2019,39(2):565-573.
[18]
张杰.纤维多孔介质的阻力特性研究[D]. 上海:东华大学, 2015. Zhang Jie. Study of the resistance properties of fiber porous media[D]. Shanghai:Donghua University, 2015.
[19]
Zhu C, Lin C H, Cheung C S. Inertial impaction-dominated fibrous filtration with rectangular or cylindrical fibers[J]. Powder technology, 2000,112(1/2):149-162.
[20]
朱辉,付海明,亢燕铭,等.单纤维过滤阻力与惯性捕集效率数值分析[J]. 中国环境科学, 2017,37(4):1298-1306. Zhu Hui, Fu Haiming, Kang Yanming, et al. Numerical analysis of single-fiber filtration resistance and inertial trap efficiency[J]. Environmental Science in China, 2017,37(4):1298-1306.
[21]
张俪安,刁永发,楚明浩,等.单纤维捕集过程中亚微米颗粒的布朗团聚[J]. 中国环境科学, 2021,41(4):1548-1554. Zhang Li'an, Diao Yongfa, Chu Minghao, et al. Brownian agglomeration of submicron particles during single fiber capture[J]. Environmental Science in China, 2021,41(4):1548-1554.
[22]
付海明,钟珂.计算机优化选择纤维滤料结构参数[J]. 纺织学报, 2008,29(12):112-116,121. Fu Haiming, Zhong Ke. The computer optimized the structural parameters of the fiber filter material[J]. Journal of Textile Science, 2008,29(12):112-116,121.